CFD Online Discussion Forums - How to creat the impeller leading edge

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)

- - How to creat the impeller leading edge (https://www.cfd-online.com/Forums/ansys-meshing/65388-how-creat-impeller-leading-edge.html)

Jasmine

June 13, 2009 02:54

How to creat the impeller leading edge

The data for pressure side and suction side are available. But for the leading edge only the blade LE inclination angle is given. How should I create the LE? thanks for any suggestion.

All times are GMT -4. The time now is 05:33.