|
[Sponsors] |
September 18, 2009, 15:20 |
To mesh a volume with a plane hanging in it
|
#1 |
New Member
Ganesh S Swamy
Join Date: Sep 2009
Posts: 6
Rep Power: 16 |
Hi all,
I have to mesh a volume with a plane suspended in it. It is something like an thin sheet with no thickness inserted into a cavity to guide the flow away from certain spots. can some one help me in meshing this case. I am using Gambit software. To better understand my problem, I have attached a picture of the volume I need to mesh. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
[Gmsh] boundaries with gmshToFoam | ouafa | OpenFOAM Meshing & Mesh Conversion | 7 | May 21, 2010 12:43 |
Ratio between bl mesh and volume mesh | nazario | ANSYS Meshing & Geometry | 0 | July 7, 2009 06:33 |
Negative volume in mesh motion | skarp | CFX | 5 | July 11, 2007 23:51 |
Interpolating volume data onto quad surface mesh | N.R. | CFX | 6 | June 7, 2007 08:15 |