CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

how to split hex mesh in icem with desired height?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 20, 2009, 17:00
Default how to split hex mesh in icem with desired height?
  #1
New Member
 
Join Date: Jul 2009
Posts: 25
Rep Power: 16
adam2008 is on a distinguished road
hi,
I have a hex mesh generated by another mesh generator and I successfully imported it into icem. I want to split the boundary elements into 5-6 layers with controlled thickness.
In icem, I found there is "split edge" function. But I can only split with split ratio. Is there any way I can split mesh with controlled thickness?

Thanks a lot for any advice
adam2008 is offline   Reply With Quote

Old   August 21, 2009, 10:13
Default Many Tools
  #2
Senior Member
 
PSYMN's Avatar
 
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47
PSYMN has a spectacular aura aboutPSYMN has a spectacular aura about
Hey Adam,

Are you talking about a mesh level or blocking level split?

If you have converted your imported mesh to blocking and want to split an Ogrid edge, just split it anywhere and then go to “Edit Blocks => Modify Ogrid” and then “Rescale Ogrid” with “Absolute Distance”.

If you really just want to split a block with an “Absolute” distance, you can choose that from the pull down under “Split Method”.

Move Vertices also has an option to “Set Edge Length”.

One last thought… If you want 5 layers in your boundary layer… Don’t put in a bunch of splits. Put in one split and then use Edge Parameters to set up your 5 layers on that index.
PSYMN is offline   Reply With Quote

Old   August 21, 2009, 21:04
Default
  #3
New Member
 
Join Date: Jul 2009
Posts: 25
Rep Power: 16
adam2008 is on a distinguished road
Many thanks for your advice. But my mesh is actually imported from a CFX def file and only has mesh node/element data without block information, even though the mesh was originally generated using a multi-block O-topology by another grid generator.

So the entire "blocking" menu was disabled in my case after mesh being imported. As i said in my first post, I was trying to use "split mesh" under "edit mesh". But I can only split mesh with controlled split ratio (I want to split mesh with certain height). Any idea I can do it in icem-cfd or even gambit?

Thanks again!
adam2008 is offline   Reply With Quote

Old   August 27, 2009, 15:59
Default Convert to Blocking...
  #4
Senior Member
 
PSYMN's Avatar
 
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47
PSYMN has a spectacular aura aboutPSYMN has a spectacular aura about
Yea, we don't have that control for splitting elements... At least not at 12.0. At 12.1, the Redistribute Prism command works with an imported mesh, and that allows you to control the initial height or ratio. But that won't be out for a few months. I am interested in testing with your model to be sure it will work in 12.1...

However, In the mean time, If you can run ICEM CFD Hexa, you can always convert mesh to blocking in ICEM CFD (File => Blocking => Load from unstructured Mesh).

Then you can do anything you want at the blocking level.
PSYMN is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import Mesh from ICEM CFD to CFX Andre Almeida CFX 16 April 19, 2016 04:42
Cannot import ANY ICEM hex core into Fluent v6.3!! Robert Perry FLUENT 11 April 12, 2012 05:30
BL from surface mesh on ICEM Davide CFX 0 August 14, 2008 07:45
ICEM block mesh with a ball in a cylinder tube Li CFX 6 August 11, 2008 06:44
Hex core mesh using ICEM CFD 10 john CFX 1 November 16, 2005 03:05


All times are GMT -4. The time now is 18:51.