CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [Other] Wind Turbine Geometry (https://www.cfd-online.com/Forums/ansys-meshing/67648-wind-turbine-geometry.html)

universityne August 21, 2009 15:16

Wind Turbine Geometry
 
I am a graduate student at the University of Nebraska and am looking for wind turbine geometry file for a research project. We are hoping to use this 3d model to model a faulty condition like rotor imbalance, gearbox failure, or icing, etc. Where can I find a 3d geometry file for a wind turbine?

Thanks,

PSYMN August 27, 2009 14:02

Home grown...
 
You may get lucky, but I can tell you that my experience is that it is usually easier to just make your own model. Find a drawing or a picture and go from there...

sivarama1 August 29, 2009 06:17

wind turbine geometry
 
Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

CFDtoy November 18, 2009 20:21

geometry sample
 
Hello there,
Could you kindly send me an example of wind turbine geometry (cfdtoy@hotmail.com) ?

Thanks!

CFDtoy

Quote:

Originally Posted by sivarama1 (Post 227877)
Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine


palomar November 19, 2009 02:03

geometry of wind turbine
 
Hi,
I have a geometry of wind turbine blade in Gambit but I need one in ICEM_CFD
I can send mine if you like
my e-mail: paolocareer@hotmail.com

Quote:

Originally Posted by sivarama1 (Post 227877)
Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine


sivarama1 November 19, 2009 06:57

wind turbine geometry
 
hi all send to you,
Thanks.

CFDtoy November 19, 2009 12:38

turbine geo
 
Hi there,
Sure. Kindly send the gambit geometry to cfdtoy@hotmail.com

Thanks for your help.

/CFDtoy

Quote:

Originally Posted by palomar (Post 236839)
Hi,
I have a geometry of wind turbine blade in Gambit but I need one in ICEM_CFD
I can send mine if you like
my e-mail: paolocareer@hotmail.com


CFDtoy November 19, 2009 12:39

wind turbine Geo
 
Hello there,
I did not receive your geometry yet. Can you kindly re-send it to cfdtoy@hotmail.com?

Thanks again for your kind help.

CFDtoy

Quote:

Originally Posted by sivarama1 (Post 236884)
hi all send to you,
Thanks.


palomar November 19, 2009 13:11

the geometry
 
I sent it to ur e-mail right now but I didn't receive yours

Quote:

Originally Posted by CFDtoy (Post 236931)
Hi there,
Sure. Kindly send the gambit geometry to cfdtoy@hotmail.com

Thanks for your help.

/CFDtoy


CFDtoy November 19, 2009 14:07

turbine geometry
 
Hi palo,
I dont have turbine mesh with me. I was requesting one from sivarama1. He indicated that he would send one to both of us. Thanks for your kind help.

Regards,

CFDtoy

Quote:

Originally Posted by palomar (Post 236940)
I sent it to ur e-mail right now but I didn't receive yours


Zhaoyang1115 January 7, 2010 15:34

Hi
 
Quote:

Originally Posted by sivarama1 (Post 227877)
Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

Hi there:
Hope this message still works. Could you kindly send me the wind turbine geometry? My email address is zhaoyang1115@hotmail.com, I really appreciate your help. Thanks a lot

rohanpatil January 10, 2010 18:26

wind turbine
 
hi, this is rohan student at northern illinois university,
i am using ansys cfx to analyse a wind turbine, please can some body help me in finding a wind turbine geometry file

girishg September 9, 2010 12:30

Hi,

Can anyone send me wind turbine geometry? my email address is girshya@gmail.com
Where can I find info about different wind turbine geometries, can anybody please help me with this?
Thank you.

- Girish

rohanpatil September 13, 2010 11:20

my e-mail id is rsp0072009@yahoo.com, please send me the file on wind turbine

alienplanet November 8, 2010 16:02

Hi i'm senior student . This term i registered to Computational Fluid Dynamics lecture. And my lecturer wants us to do one of the cfd models at list that attached to the message. But i want to do cfd model of HAWT. I know that how i make a structured mesh but i haven't any geometry data about hawt. If anyone see the message , please contact me as soon as possible.

thank you

alienplanet November 8, 2010 16:04

Hi i'm senior student . This term i registered to Computational Fluid Dynamics lecture. And my lecturer wants us to do one of the cfd models at list that attached to the message. But i want to do cfd model of HAWT. I know that how i make a structured mesh but i haven't any geometry data about hawt. If anyone see the message , please contact me as soon as possible.

thank you

teguhtf November 17, 2010 06:29

Can you send me the Turbine file too??
 
Hi There,
Can you send me the Turbine file too?? my email is huget_teguh@ymail.com
Thank you!!:)
Teguh

ubaid March 30, 2011 03:41

Wind Turbine Geometry
 
Hello Everybody,

I hope this thread still works, can anyone please send me the geometry of wind turbine?

Thanks a lot in advance.

Best Regards,
Ubaid.

arghavan October 6, 2011 03:42

Quote:

Originally Posted by sivarama1 (Post 227877)
Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

Hi
I'm a student doing research on wind turbine.I need a profile of blade.kindly send me the gambit geometry to mohandes_girl_mh@yahoo.com
thanks for help.

whiteflower February 25, 2012 15:48

3-D airfoil wing model in gambit
 
hi everybody,
I am a gratuate student.I like to create a 3d airfoil wing with taper and twist in gambit. I was tried to create 3d airfoil wing in gambit for CFD simulation. Can anyone help me out how can i do that.It's seems to me very complecated.Please, help me......Thanks.

whiteflower


All times are GMT -4. The time now is 22:51.