|
[Sponsors] |
[ICEM] Help exporting mesh for Gridgen/Tecplot |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 16, 2009, 09:38 |
[ICEM] Help exporting mesh for Gridgen/Tecplot
|
#1 |
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 733
Rep Power: 25 |
Hi,
I've made a 2D mesh in ICEM tetra/prism and I have to send it to someone to view but they can only view it using either Pointwise Gridgen v15.13 or Tecplot 360. I've tried exporting setting the Output -> Solver to Fluent, Nastran, CGNS, Plot3d from ICEM thinking that these are the most common formats but they don't open in either gridgen or Tecplot. Please can someone help me with this. Thanks. |
|
November 21, 2009, 10:06 |
|
#2 |
Senior Member
John Chawner
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 275
Rep Power: 18 |
Hi siw:
I'm not sure what a 2D tet/prism mesh is (i.e. tets and prisms are 3d cells). If you tell me what cell types are in the mesh and how they are arranged, that would help me figure out which file formats might work. Right off the top of my head, maybe VRML or STL would do the trick for Gridgen. Will have to let our friends at Tecplot talk about their mesh import formats.
__________________
John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner |
|
November 23, 2009, 08:38 |
|
#3 |
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 733
Rep Power: 25 |
Hi,
Tetra/Prism is the licence type I have for ICEM CFD (I don't have the Hexa licence so the Blocking tab and features are not available to me). Since my original post I've gotten around the problem. Regards |
|
November 23, 2009, 11:04 |
|
#4 |
Member
Alexander
Join Date: Nov 2009
Location: Blansko, Czech Republic
Posts: 30
Rep Power: 16 |
Hi. You can export you mesh to fluent or another solver and then export to tecplot.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Applying surface mesh settings | siw | ANSYS Meshing & Geometry | 2 | August 21, 2009 02:16 |
Exporting mesh from Fluent | allamarein | FLUENT | 0 | April 10, 2009 14:09 |
Exporting mesh to fluent | Guest | CFX | 3 | October 6, 2005 03:12 |
Gambit error in exporting mesh in 3D modeling | Mazyar | FLUENT | 5 | March 31, 2004 10:50 |
exporting compressed Gambit mesh file | HGG | Main CFD Forum | 0 | November 20, 2001 16:36 |