CFD Online Discussion Forums

CFD Online Discussion Forums (
-   ANSYS Meshing & Geometry (
-   -   Help with GAMBIT modelling (

northdako January 28, 2010 11:20

Help with GAMBIT modelling
2 Attachment(s)
I'm doing an analysis of an open-window bus.... but i cant figure out huv to model the window... i'm relatively new to fluent... can anyone help me out.. please?? huw do i model the open part as part of the bus?? Plz help!!

-mAx- February 1, 2010 02:22

split the surface containing the windows, with the blue surfaces (windows)

northdako February 1, 2010 02:32

tanx.... ive done that but den i get only a face r8?? but i need the bus as a volume... ive made one volume as the bigger cuboid minus the smaller cuboid (the bus) for the flow inside the bus i need to form the bus as a volume rt?? but i cant figure out to make a volume wid the open part (the window)

-mAx- February 1, 2010 06:33

hmm, and I assume your bus hasn't any thickness (you only have a surface between the volume inside the bus, and outside).
ok, you can do followings:
*go back to beginning
*delete the bus volume, but keep the outer surface
*create the window surfaces
*split window surfaces from bus-outer surface
*Create your computation domain, and split it with all the surfaces (outer surface + windows)
You can Mesh your model.
YOu only have to pay attention, while defining your BC.
You must define the outer surface (of the bus) as wall, the windows should be exported as Interior per default

northdako February 4, 2010 05:13

thank u so much max.... u solved my problem :D

All times are GMT -4. The time now is 15:29.