Need help icem cfd

ayush · June 27, 2011, 01:40

I am meshing a simple manifold, I created INLETS and OUTLETS parts, with a single material body in the fluid domain. But I created the inlet and outlet seleting Surfaces (Breaking connectivity of the initial TRM_SRFACE) . Now when I change the initial geometry dimensions and then try to remesh the new geometry with the same replay file. The outlet part just wont get created, however INLET does. I am automating the meshing process. And this seems the final hurdle... PLZZ help..

I am using an IGES file to mesh the manifold (created via Surfaces option)

ayush · June 27, 2011, 05:51

I found a way around the problem, but that too has a misgiving, I now need to create a Replay file .. via a replay file ... Can that be done ?

PSYMN · June 28, 2011, 13:46

Yes, you can record the command to save a replay file in the replay file... so no problem... But why?

ayush · June 28, 2011, 21:56

The reason I needed the replay file to record a replay file is,
the part OUTLETS I created via selection, wouldn't have the same feature names if say I ran the same replay file for a scaled version of the geometry, as I found out. i.e. if say every dimension of the same model were made 6 times (without creating something new in the geometry) I expected ICEM CFD to keep the names of the curves and points same as the previous model, for automation of the MESHING PROCESS.
But Alas ! that wasn't the way icem was working !! And since a replay file can capture all the feature names when I break connectivity of the Surfaces, I can use a bit of programming to extract the names from the replay file... I have done this without using replay files but using the tetin file of the model and it is working perfectly, but a replay file will cut my programming really short.... Please help !!
Summary :
Replay 1 : Model Scale 1
Outlet Selected feature : F_44 (say)
Replay 1 : Model Scale 6 (Dimensions made 6 times the orignal)
Outlet Selected Feature : F_48 (though I did nothing to the geometry, but scaled it, the feature name changed !)

masoudmohammadian · March 24, 2014, 13:04

Hello dear friend.
What is RMB and LMB in ICEM? Could you please explain it?

rsskarthikeyan · January 31, 2017, 01:09

Quote:

Originally Posted by masoudmohammadian

Hello dear friend.
What is RMB and LMB in ICEM? Could you please explain it?

Left mouse button stands for LMB and
right mouse button stands for RMB

June 27, 2011, 01:40	Plzz help: Meshing Manifolds	#21
ayush New Member A-Vdia Join Date: Jun 2011 Posts: 5 Rep Power: 14	I am meshing a simple manifold, I created INLETS and OUTLETS parts, with a single material body in the fluid domain. But I created the inlet and outlet seleting Surfaces (Breaking connectivity of the initial TRM_SRFACE) . Now when I change the initial geometry dimensions and then try to remesh the new geometry with the same replay file. The outlet part just wont get created, however INLET does. I am automating the meshing process. And this seems the final hurdle... PLZZ help.. I am using an IGES file to mesh the manifold (created via Surfaces option)

June 27, 2011, 05:51	Replay File	#22
ayush New Member A-Vdia Join Date: Jun 2011 Posts: 5 Rep Power: 14	I found a way around the problem, but that too has a misgiving, I now need to create a Replay file .. via a replay file ... Can that be done ?

June 28, 2011, 13:46		#23
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Yes, you can record the command to save a replay file in the replay file... so no problem... But why? __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ICEM CFD Scripts	Vinod Dhiman	Main CFD Forum	2	February 17, 2010 10:56
Help for ICEM CFD - urgent	Tuks	CFX	3	February 8, 2010 03:32
ICEM CFD to CFX geometry and mesh	Luca	CFX	6	February 4, 2010 16:31
How about ICEM CFD	M.Gao	Main CFD Forum	1	November 15, 1999 04:15
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 12, 1999 23:27

June 28, 2011, 21:56		#24
ayush New Member A-Vdia Join Date: Jun 2011 Posts: 5 Rep Power: 14	The reason I needed the replay file to record a replay file is, the part OUTLETS I created via selection, wouldn't have the same feature names if say I ran the same replay file for a scaled version of the geometry, as I found out. i.e. if say every dimension of the same model were made 6 times (without creating something new in the geometry) I expected ICEM CFD to keep the names of the curves and points same as the previous model, for automation of the MESHING PROCESS. But Alas ! that wasn't the way icem was working !! And since a replay file can capture all the feature names when I break connectivity of the Surfaces, I can use a bit of programming to extract the names from the replay file... I have done this without using replay files but using the tetin file of the model and it is working perfectly, but a replay file will cut my programming really short.... Please help !! Summary : Replay 1 : Model Scale 1 Outlet Selected feature : F_44 (say) Replay 1 : Model Scale 6 (Dimensions made 6 times the orignal) Outlet Selected Feature : F_48 (though I did nothing to the geometry, but scaled it, the feature name changed !)

March 24, 2014, 13:04		#25
masoudmohammadian New Member Masoud Join Date: Feb 2014 Posts: 22 Rep Power: 12	Hello dear friend. What is RMB and LMB in ICEM? Could you please explain it?