CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] meshing tetrakaidecahedron

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 23, 2020, 15:28
Default meshing tetrakaidecahedron
  #1
New Member
 
zahid ahmed qureshi
Join Date: Nov 2019
Posts: 4
Rep Power: 6
zaqureshi is on a distinguished road
Dear Fellows,

I have got somecomplicated 3D thin-walled geometry i.e. a tetrakaidecahedron. i am struggling with the mesh quality. In order to get high quality mesh, i tried high cell density but to no avail. I have tried free meshing, cut-cell method, hex dominant, none is working. Probably im doing something wrong. I m new to ansys as well.

Can anyone guide me on this? below is the link for a similar geometry.

https://grabcad.com/library/tetrakaidecahedron-2
zaqureshi is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] only automatic meshing works, kazra ANSYS Meshing & Geometry 2 February 23, 2017 12:38
[ICEM] Flow channel meshing problems StefanG ANSYS Meshing & Geometry 19 May 15, 2012 07:44
[ANSYS Meshing] Meshing strategy for External Flows Hybrid ANSYS Meshing & Geometry 0 January 24, 2012 15:27
Best Meshing scheme for Cylinder Nutrex Main CFD Forum 4 July 29, 2008 12:03
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 16:59.