CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

How to mesh a swept wing in ICEM?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 24, 2010, 13:34
Default How to mesh a swept wing in ICEM?
  #1
New Member
 
Ke peng
Join Date: Jul 2009
Posts: 19
Rep Power: 16
kepeng is on a distinguished road
Hi, every one.
I currently try to mesh a swept wing, with the airfoil of NACA65a008, where the trailing edge is just a line. firstly, i split it into a O-grid, then split it into 3 part along in spanwise. Finally i got a very bad quality mesh, especially near the wing tip and root, where is just triangle near the trailing edge.

could somebody give me some advise on how to mesh a swept wing? Thanks a lot.

the geom and mesh is attached.
Attached Images
File Type: jpg wing-geom.JPG (6.9 KB, 44 views)
File Type: jpg wing-mesh.JPG (83.4 KB, 57 views)
kepeng is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 27 February 6, 2018 04:34
ICEM hexa mesh built with v10 deformed in v11 (degenerated edges) cfxicem ANSYS Meshing & Geometry 1 October 14, 2009 16:06
Boddy fitted Hexcore Mesh in ICEM Cfd Mitch CFX 0 December 29, 2008 07:07
How to corse mesh in icem cfd? Priety CFX 2 October 2, 2006 04:57
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks ! Vu Trinh Tuan CFX 11 March 28, 2005 20:04


All times are GMT -4. The time now is 09:09.