|May 17, 2010, 07:02||
GAMBIT-meshing 20M elements with 3gb ram ???
Join Date: May 2009
Posts: 90Rep Power: 9
I heard that we can mesh as much as we want by dividing the flow volumes into many sections. Than saving them each time.
Lets say the mesh you want needs 18gb RAM.
You have 3Gb.
Then you divide your flow wolume into 6
Mesh each of them, and save.
Close GAMBIT, open it again.
Keep meshing 6 times
Than you have 20M elements mesh...
Can it be possible? And how do we connect these meshes?
|May 22, 2010, 07:22||
When you reopen your .dbs (or whatever it is) file, to mesh the remaining volumes, I think that Gambit will load the already meshed volumes into your ram, so I am not sure meshing the whole volume part by part will help, but I can be wrong (I am a beginner)
But I know you can connect face meshes with the "Face mesh connect" tool located in the mesh command panel (or is it the geometric command panel)
Check all the box and search for "connect/link faces"
I hope this helped you
|May 25, 2010, 01:41||
Join Date: Mar 2009
Posts: 3,186Rep Power: 33
You can work and create such mesh with your hardware configuration.
But the problem will come as you will try to export your mesh.
The workaround could be to create one dbs file for each volume (or several volumes), and define interfaces between volumes you export.
Then load each mesh in fluent : the first one as usual (file/read/case..) and the other with grid/zone/append case file...
Reconnect your meshes by defining interfaces (define/interface...)
In memory of my friend Hervé: CFD engineer & freerider
|Thread||Thread Starter||Forum||Replies||Last Post|
|[GAMBIT] Desperate student needs help meshing 3D GAMBIT model - please help!||lau06165||ANSYS Meshing & Geometry||1||March 22, 2010 02:09|
|3d Gambit meshing shows out of memory||tamjid||FLUENT||3||September 27, 2008 01:01|
|Meshing problem in GAMBIT||Vidya Raja||FLUENT||0||May 20, 2006 23:31|
|Meshing Aircraft with Gambit||Ed||FLUENT||5||November 9, 2004 06:04|
|CFX4.3 -build analysis form||Chie Min||CFX||5||July 12, 2001 23:19|