[Other] Connecting 3D bodies in Ansys Design Modeler

chipper · June 7, 2010, 18:50

Hello all,

I try to design a catalytic converter in 3D with ansys 12.1 design modeler. I connect different parts of the converter(i.e. inlet pipe, connecting cone, monolithic chamber, etc) with "skin/loft" feature. The problem is that when I try to use the model in Fluent, it recognize the connecting parts between different parts as "wall" while all of them are just "interior". I tried to use "Named Selection" feature in both Design Modeler and Meshing tools to define these connecting parts as just interior but I could not succeed. Also, I defined all the three parts I have in my model as Fluids in design modeler but still when I use meshing tool , it recognize the connecting sketches as "bonded-solid to solid" , which I could not change, and so treat them as wall. I will appreciate it if someone has a solution for it.

Best regards

PSYMN · June 18, 2010, 14:10

You probably need to join the parts together as a multibody part in DM...

Right now it sees them as several parts that are touching, it will mesh each separately, etc. Once they are a multibody part, it will mesh it all at once.

Simon

chipper · June 18, 2010, 21:42

Thank you so much Simon for your reply.
The problem is that I need to have different parts in my scheme, because for example one part is porous and in one of them I have reaction. So, I had to freeze each part in DM to have them on Fluent for further work. Do you know a way that I could have different parts in DM and meanwhile it just recognize them as a continuum media?

Sincerely,
Chipper

Quote:

Originally Posted by PSYMN

You probably need to join the parts together as a multibody part in DM...

Right now it sees them as several parts that are touching, it will mesh each separately, etc. Once they are a multibody part, it will mesh it all at once.

Simon

PSYMN · June 19, 2010, 09:46

Sure, go ahead and make the multibody part so that it will all be meshed conformal... Then (before or after meshing) right click on each body and create a named selection (similar to how you lable inlets and outlets, but make sure that the selection is for bodies not faces). These named selections tag each volume for Fluent bocos (just as they tagged faces). So you could name one porous, another Fluid1, another Fluid2, another solid or whatever...

et.one · January 25, 2018, 09:45

Hi,

I would like to create different parts ( different connected volume) but all being part of one body. I have not found anything on the forum.

Please Can anyone help me or tell me where I can find the answer?

thank you very much in advance

June 7, 2010, 18:50	Connecting 3D bodies in Ansys Design Modeler	#1
chipper New Member Join Date: Jun 2010 Posts: 2 Rep Power: 0	Hello all, I try to design a catalytic converter in 3D with ansys 12.1 design modeler. I connect different parts of the converter(i.e. inlet pipe, connecting cone, monolithic chamber, etc) with "skin/loft" feature. The problem is that when I try to use the model in Fluent, it recognize the connecting parts between different parts as "wall" while all of them are just "interior". I tried to use "Named Selection" feature in both Design Modeler and Meshing tools to define these connecting parts as just interior but I could not succeed. Also, I defined all the three parts I have in my model as Fluids in design modeler but still when I use meshing tool , it recognize the connecting sketches as "bonded-solid to solid" , which I could not change, and so treat them as wall. I will appreciate it if someone has a solution for it. Best regards

June 18, 2010, 14:10	MultiBody	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	You probably need to join the parts together as a multibody part in DM... Right now it sees them as several parts that are touching, it will mesh each separately, etc. Once they are a multibody part, it will mesh it all at once. Simon

June 19, 2010, 09:46	Named Selections	#4
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Sure, go ahead and make the multibody part so that it will all be meshed conformal... Then (before or after meshing) right click on each body and create a named selection (similar to how you lable inlets and outlets, but make sure that the selection is for bodies not faces). These named selections tag each volume for Fluent bocos (just as they tagged faces). So you could name one porous, another Fluid1, another Fluid2, another solid or whatever... Nurzhan and Khan_CFD like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2-D Design Modeler Geometry - Ansys 12.0	hodeje01	ANSYS Meshing & Geometry	2	October 7, 2009 10:42
Any other way of converting a multi part to a single part avoiding ANSYS Design Model	LusoMundo	ANSYS Meshing & Geometry	1	May 14, 2009 14:35
Design Modeler to ICEM.....	Joe	CFX	0	January 24, 2008 03:39
CFX design modeler	Merkur	CFX	0	June 5, 2006 10:44
Info: Short Course On Thermal Design of Electronic Equipment	Arnold Free	Main CFD Forum	0	August 10, 1999 10:18

January 25, 2018, 09:45		#5
et.one New Member Join Date: Jul 2017 Posts: 11 Rep Power: 8	Hi, I would like to create different parts ( different connected volume) but all being part of one body. I have not found anything on the forum. Please Can anyone help me or tell me where I can find the answer? thank you very much in advance