[ICEM] v10 and v11 compatibility problem

Sofia · August 2, 2010, 05:39

Hi everybody!
I'm currently using ICEM CFD v10 on a rae2822 airfoil. I'm using a geometry imported from ICEM v11. I have imported it by using File>>Import Geometry>>STEP/IGESY>> my file *.stp. I had to select "Use version 5.1 step translator" to keep my geometrical scaling. But it seems that i have compatibility errors (i made the same work on a v11).

Does anyone knows how i can do a proper importation of a v11 geometry on a v10 Icem please??

PSYMN · August 3, 2010, 22:00

Don't convert back to IGES... If you already have the ICEM CFD Version 11 Tetin file (*.tin), Just load that file in V11 and then go to File (menu) => Geometry => Save Geometry as version => Version 10 File...

But just out of curiosity, why are you going back to version 10?

Simon

Sofia · August 4, 2010, 07:58

Thank you!!

I have the v10 on my computer but the geometry I received was a v11 one!

PSYMN · August 4, 2010, 21:36

So are you set then?

There is a text editor way you can fix the files without having 11.0 on hand to fix it for you. You just need to delete a line, I don't quite recall the details since I havn't needed 10.0 for a long time, but can try to dig it up if you need it. Send me the error message you got since that will help me remember.

I still recommend updating to 12.1.

Simon

Sofia · August 5, 2010, 07:29

Yes, the problem is solved with the saving procedure! Thank you very much Simon!

August 2, 2010, 05:39	v10 and v11 compatibility problem	#1
Sofia New Member Sofia Join Date: May 2010 Location: Toulouse, France Posts: 14 Rep Power: 15	Hi everybody! I'm currently using ICEM CFD v10 on a rae2822 airfoil. I'm using a geometry imported from ICEM v11. I have imported it by using File>>Import Geometry>>STEP/IGESY>> my file *.stp. I had to select "Use version 5.1 step translator" to keep my geometrical scaling. But it seems that i have compatibility errors (i made the same work on a v11). Does anyone knows how i can do a proper importation of a v11 geometry on a v10 Icem please??

August 3, 2010, 22:00	Save Geometry as version	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Don't convert back to IGES... If you already have the ICEM CFD Version 11 Tetin file (*.tin), Just load that file in V11 and then go to File (menu) => Geometry => Save Geometry as version => Version 10 File... But just out of curiosity, why are you going back to version 10? Simon

August 4, 2010, 21:36	10.0	#4
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	So are you set then? There is a text editor way you can fix the files without having 11.0 on hand to fix it for you. You just need to delete a line, I don't quite recall the details since I havn't needed 10.0 for a long time, but can try to dig it up if you need it. Send me the error message you got since that will help me remember. I still recommend updating to 12.1. Simon

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ICEM hexa mesh built with v10 deformed in v11 (degenerated edges)	cfxicem	ANSYS Meshing & Geometry	1	October 14, 2009 15:06

August 4, 2010, 07:58		#3
Sofia New Member Sofia Join Date: May 2010 Location: Toulouse, France Posts: 14 Rep Power: 15	Thank you!! I have the v10 on my computer but the geometry I received was a v11 one!

August 5, 2010, 07:29		#5
Sofia New Member Sofia Join Date: May 2010 Location: Toulouse, France Posts: 14 Rep Power: 15	Yes, the problem is solved with the saving procedure! Thank you very much Simon!