|
[Sponsors] |
[Other] Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0 |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 26, 2010, 15:28 |
Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0
|
#1 |
Member
pedro gonzalez
Join Date: Aug 2010
Location: Barcelona, Venezuela
Posts: 35
Rep Power: 16 |
Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX 12.0. Somebody have any handbook or manual of Bladedesign or BladeGen 12.0 ?. I appreciate any response. Greetingsˇˇˇ
|
|
August 27, 2010, 12:57 |
|
#2 |
Member
Sherif Kadry
Join Date: May 2009
Posts: 38
Rep Power: 17 |
Are you trying to design the blade shape or you have the geometry and are trying to mesh it with the cooling holes or slots? I have some experience, and if you're looking at geometry of the cooling holes look at papers by K. Thole and J.C Han.
If you like I can send you a geometry that we have analyzed in the past. |
|
August 27, 2010, 15:36 |
|
#3 |
Member
pedro gonzalez
Join Date: Aug 2010
Location: Barcelona, Venezuela
Posts: 35
Rep Power: 16 |
I have some geometries of gas turbine blades with cooling and some experimental studies, I need to validate these studies by CFD simulation in ANSYS 12.0 and draw gas turbine cooled blades in ANSYS WORKBENCH 12.0. I need manuals or handbook of ANSYS 12.0 Bladedesign or Bladegen Workbench with information to design and draw the blades. I have seen some articles by Han, Wright, and some theses. I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com.Thanks youˇ.Greetingsˇ.
|
|
October 13, 2010, 17:42 |
gas turbine blades
|
#4 |
Member
pedro gonzalez
Join Date: Aug 2010
Location: Barcelona, Venezuela
Posts: 35
Rep Power: 16 |
I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com Thanks youˇ. Greetingsˇ.
|
|
January 24, 2012, 02:35 |
|
#5 | |
New Member
fazil.n
Join Date: Mar 2011
Posts: 1
Rep Power: 0 |
Quote:
thanks in advace |
||
February 2, 2013, 12:47 |
|
#6 | |
New Member
pradeep kumar boda
Join Date: Feb 2013
Posts: 3
Rep Power: 13 |
Quote:
|
||
February 2, 2013, 12:51 |
|
#7 | |
New Member
pradeep kumar boda
Join Date: Feb 2013
Posts: 3
Rep Power: 13 |
Quote:
|
||
February 2, 2013, 12:52 |
|
#8 |
New Member
pradeep kumar boda
Join Date: Feb 2013
Posts: 3
Rep Power: 13 |
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
film cooling in gas turbine blade | ponnusamy | Main CFD Forum | 5 | January 25, 2011 17:24 |
Turbine film cooling simulation | Lorenzo | CFX | 1 | September 9, 2010 13:13 |
Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0 | pedrin84 | CFX | 3 | August 25, 2010 15:07 |
Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0 | pedrin84 | ANSYS Meshing & Geometry | 0 | August 25, 2010 13:19 |
gas turbine combustor linear cooling holes- cfd | P.K.UDAYAKUMAR | FLUENT | 1 | December 13, 2002 03:08 |