[Other] Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0

pedrin84 · August 26, 2010, 14:28

Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX 12.0. Somebody have any handbook or manual of Bladedesign or BladeGen 12.0 ?. I appreciate any response. Greetings¡¡¡

sherifkadry · August 27, 2010, 11:57

Are you trying to design the blade shape or you have the geometry and are trying to mesh it with the cooling holes or slots? I have some experience, and if you're looking at geometry of the cooling holes look at papers by K. Thole and J.C Han.
If you like I can send you a geometry that we have analyzed in the past.

pedrin84 · August 27, 2010, 14:36

I have some geometries of gas turbine blades with cooling and some experimental studies, I need to validate these studies by CFD simulation in ANSYS 12.0 and draw gas turbine cooled blades in ANSYS WORKBENCH 12.0. I need manuals or handbook of ANSYS 12.0 Bladedesign or Bladegen Workbench with information to design and draw the blades. I have seen some articles by Han, Wright, and some theses. I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com.Thanks you¡.Greetings¡.

pedrin84 · October 13, 2010, 16:42

I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com Thanks you¡. Greetings¡.

fazil · January 24, 2012, 01:35

Quote:

Originally Posted by sherifkadry

Are you trying to design the blade shape or you have the geometry and are trying to mesh it with the cooling holes or slots? I have some experience, and if you're looking at geometry of the cooling holes look at papers by K. Thole and J.C Han.
If you like I can send you a geometry that we have analyzed in the past.

hi i am m.tech student and making a project on cooling of gas turbine blades, i am finding bit difficulties in making geometry so wl u send me geometry of blade. my mail id id talk2fazil@gmail.com

thanks in advace

pradeep · February 2, 2013, 11:47

Quote:

Originally Posted by sherifkadry

Are you trying to design the blade shape or you have the geometry and are trying to mesh it with the cooling holes or slots? I have some experience, and if you're looking at geometry of the cooling holes look at papers by K. Thole and J.C Han.
If you like I can send you a geometry that we have analyzed in the past.

sir i want to design the blades.... could you please send the gas turbine blade profiles ??

pradeep · February 2, 2013, 11:51

Quote:

Originally Posted by pedrin84

I have some geometries of gas turbine blades with cooling and some experimental studies, I need to validate these studies by CFD simulation in ANSYS 12.0 and draw gas turbine cooled blades in ANSYS WORKBENCH 12.0. I need manuals or handbook of ANSYS 12.0 Bladedesign or Bladegen Workbench with information to design and draw the blades. I have seen some articles by Han, Wright, and some theses. I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com.Thanks you¡.Greetings¡.

pls send me those geometry of profiles

pradeep · February 2, 2013, 11:52

Quote:

Originally Posted by pradeep

sir i want to design the blades.... could you please send the gas turbine blade profiles ??

August 26, 2010, 14:28	Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0	#1
pedrin84 Member pedro gonzalez Join Date: Aug 2010 Location: Barcelona, Venezuela Posts: 35 Rep Power: 15	Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX 12.0. Somebody have any handbook or manual of Bladedesign or BladeGen 12.0 ?. I appreciate any response. Greetings¡¡¡

October 13, 2010, 16:42	gas turbine blades	#4
pedrin84 Member pedro gonzalez Join Date: Aug 2010 Location: Barcelona, Venezuela Posts: 35 Rep Power: 15	I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com Thanks you¡. Greetings¡.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
film cooling in gas turbine blade	ponnusamy	Main CFD Forum	5	January 25, 2011 16:24
Turbine film cooling simulation	Lorenzo	CFX	1	September 9, 2010 12:13
Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0	pedrin84	CFX	3	August 25, 2010 14:07
Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0	pedrin84	ANSYS Meshing & Geometry	0	August 25, 2010 12:19
gas turbine combustor linear cooling holes- cfd	P.K.UDAYAKUMAR	FLUENT	1	December 13, 2002 02:08

August 27, 2010, 11:57		#2
sherifkadry Member Sherif Kadry Join Date: May 2009 Posts: 38 Rep Power: 16	Are you trying to design the blade shape or you have the geometry and are trying to mesh it with the cooling holes or slots? I have some experience, and if you're looking at geometry of the cooling holes look at papers by K. Thole and J.C Han. If you like I can send you a geometry that we have analyzed in the past.

August 27, 2010, 14:36		#3
pedrin84 Member pedro gonzalez Join Date: Aug 2010 Location: Barcelona, Venezuela Posts: 35 Rep Power: 15	I have some geometries of gas turbine blades with cooling and some experimental studies, I need to validate these studies by CFD simulation in ANSYS 12.0 and draw gas turbine cooled blades in ANSYS WORKBENCH 12.0. I need manuals or handbook of ANSYS 12.0 Bladedesign or Bladegen Workbench with information to design and draw the blades. I have seen some articles by Han, Wright, and some theses. I would like that you send me your geometry that you have analyzed. My mail is: pedrogonz84@hotmail.com.Thanks you¡.Greetings¡.