CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   How to work with imported mesh (https://www.cfd-online.com/Forums/ansys-meshing/81475-how-work-imported-mesh.html)

Ali.M.Habib October 27, 2010 23:45
How to work with imported mesh
 
I created mesh consists of triangles , out of anasys (using programming language) and Imported it in ansys ,
what's the steps to do to apply finite element analysis on it , sorry I am totally new to ansys , I just successed in importing it either as geometry or mesh

any suggsetion please

your fast respone is highly appretiated

PSYMN October 28, 2010 09:32
Tutorials.
 
Look up some ANSYS tutorials... Also, this is more of a meshing forum...

Ali.M.Habib October 28, 2010 10:45
Quote:
Originally Posted by PSYMN (Post 281191)
Look up some ANSYS tutorials... Also, this is more of a meshing forum...
do u know any good tutorial for that , I failled to get one


Best regards

PSYMN October 28, 2010 11:05
WHat version are you using? Most include tutorials. Most Hexa Tutorials include Ogrid.

If you are using R12 or 12.1, you can find the tutorials on the customer portal.

Ali.M.Habib October 28, 2010 18:42
Quote:
Originally Posted by PSYMN (Post 281220)
WHat version are you using? Most include tutorials. Most Hexa Tutorials include Ogrid.

If you are using R12 or 12.1, you can find the tutorials on the customer portal.
I use R11, if you have tutorial sites for that will be Ok, aI will have look on the portal

Best regards

PSYMN October 28, 2010 19:57
Built in.
 
For R11, they were built right in. Look under Help => Tutorials.


All times are GMT -4. The time now is 09:01.