Questions about ANSYS ICEM CFD tutorial

pquispea_m5 · December 4, 2010, 20:52

hi,

i have a few question about the manual in section 3.7.2 "Tutorial Opera M6 Wing with 0.54 M":

1) In the visualization of result iget pressures over the wing. how can i get the dimension of this values? Are they in Mpa in this case?

2) If i want to get stresses and deformations on wing (from root to tip), how can i export the pressures values (i understand it as loads) to ANSYS Workbench? so i assign boundary conditions and materials properties to calculate it. Or is it calculated in ANSYS ICEM CFD directly? Thanks

Greets,
Pablo

pquispea_m5 · December 5, 2010, 15:24

Any answer please.
grts,
Pablo

PSYMN · December 5, 2010, 15:30

That tutorial shows post in ICEM CFD Visual3 Post... It is possible to map these results to FEA output. I made a tutorial for that years ago, but I just did a search and couldn't find it.

I recommend you use CFD Post in ANSYS Workbench which makes it much easier. There are a number of new tutorials explaining the process.

Sorry, I have switched to CFD Post several years ago and don't have a fresh memory about Visual3...

Usually, there is a legend to help you interpret the colors. You can also draw lines to use as the Xaxis of a 2D pressure plot, etc.

pquispea_m5 · December 5, 2010, 15:58

thanks for your answer simon. we are in contact
grts,
Pablo

December 4, 2010, 20:52	Questions about ANSYS ICEM CFD tutorial	#1
pquispea_m5 New Member pablo Join Date: Dec 2010 Posts: 3 Rep Power: 15	hi, i have a few question about the manual in section 3.7.2 "Tutorial Opera M6 Wing with 0.54 M": 1) In the visualization of result iget pressures over the wing. how can i get the dimension of this values? Are they in Mpa in this case? 2) If i want to get stresses and deformations on wing (from root to tip), how can i export the pressures values (i understand it as loads) to ANSYS Workbench? so i assign boundary conditions and materials properties to calculate it. Or is it calculated in ANSYS ICEM CFD directly? Thanks Greets, Pablo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Import Mesh from ICEM CFD to CFX	Andre Almeida	CFX	16	April 19, 2016 03:42
[ICEM] what does the different ANSYS ICEM and ANSYS Workbench?	agungwp	ANSYS Meshing & Geometry	8	April 12, 2016 04:51
Opening ICEM CFD directly from ANSYS	matheusguzella	ANSYS Meshing & Geometry	6	February 22, 2010 11:27
Free UK seminars: ANSYS CFD software	Gavin Butcher	CFX	0	November 23, 2004 09:13
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 21:10

December 5, 2010, 15:24		#2
pquispea_m5 New Member pablo Join Date: Dec 2010 Posts: 3 Rep Power: 15	Any answer please. grts, Pablo

December 5, 2010, 15:30		#3
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	That tutorial shows post in ICEM CFD Visual3 Post... It is possible to map these results to FEA output. I made a tutorial for that years ago, but I just did a search and couldn't find it. I recommend you use CFD Post in ANSYS Workbench which makes it much easier. There are a number of new tutorials explaining the process. Sorry, I have switched to CFD Post several years ago and don't have a fresh memory about Visual3... Usually, there is a legend to help you interpret the colors. You can also draw lines to use as the Xaxis of a 2D pressure plot, etc.

December 5, 2010, 15:58		#4
pquispea_m5 New Member pablo Join Date: Dec 2010 Posts: 3 Rep Power: 15	thanks for your answer simon. we are in contact grts, Pablo