Tetra meshing with BL
1 Attachment(s)
hi ,
am not able to generate vol mesh using tetrahedral cells.getting an error, plz let me know where i went wrong |
it seems you have skewness problem.
If you get a 3d mesh check volume mesh quality and check where is worst element. If you don't get 3d Mesh, do the same but in 2d. |
hi max,
i got a crude mesh at-least as a preliminary one.i wanted to know how much of quality of cells is satisfactory as a thumb rule .i got a quality of 0.85 for the worst element. also before going for refining the mesh by moving nodes,what other steps can be taken to improve the mesh(tetra). |
0.85 for tetra is good.
If it is not already done, try to mesh it with tetra-hexcore (it filled the core of your domain with hexa)--> very powerful |
All times are GMT -4. The time now is 21:17. |