CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Improve non-symmetrical airfoil meshing-icem or gambit (https://www.cfd-online.com/Forums/ansys-meshing/85866-improve-non-symmetrical-airfoil-meshing-icem-gambit.html)

RGRUIZ March 8, 2011 22:04

Improve non-symmetrical airfoil meshing-icem or gambit
 
2 Attachment(s)
Hi, I am trying to improve my mesh using GAMBIT (Basically because it is the mesh generator I have). I have seen mesh that are refined only on the airfoil, i would like to know how do the do it! because i have tried everything and i only got errors and a mesh so big that has so many elements that results impractical.

I attached some pictures so if you have any ideas it would be nice. I can use icem but i really donīt know how to use it.

I need a y+=1.

Itīs not a symmetrical airfoil, so i am stock and i do not know what yo do, any help would be niceAttachment 6802

Attachment 6803


All times are GMT -4. The time now is 23:09.