CFD Online Logo CFD Online URL
Home > Forums > ANSYS Meshing & Geometry

Grid quality check for impingement configuration

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 4, 2011, 09:13
Default Grid quality check for impingement configuration
Join Date: Jan 2011
Posts: 37
Rep Power: 8
rskrishna87 is on a distinguished road

I have doubt regarding my mesh quality. I have an impingement plate with inlet and outlet as shown in the the figure. The thing is yplus on the avereage if i calculate on the buckle is around 1.3. but at some points it is 2.7. so can is the mesh quality acceptable?. And i saw in some discussions that the yplus sholud be less than 1. And when i see the yplus avereaged over the whole fluid solid interface it is around 0.49.

Thanks in advance for your reply,

Attached Images
File Type: jpg Yplus-reference.jpg (44.3 KB, 10 views)
rskrishna87 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 03:01
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
Grid Independent Solution Chuck Leakeas Main CFD Forum 2 May 26, 2000 11:18
Grid Quality and the Solution Faraz Main CFD Forum 4 January 10, 2000 19:18
LES & grid quality Ales Skotak Main CFD Forum 1 July 23, 1999 09:46

All times are GMT -4. The time now is 09:12.