|June 22, 2011, 10:33||
Software issues/errors with ICEM
Join Date: Feb 2010
Posts: 31Rep Power: 8
I post this already in the Main Forum, but I guess its worth a new thread here.
I am getting 'segmentation violation' when I try to convert my Pre-Mesh to Multiblock Mesh. It should not be a memory fault, because I tried it with a small mesh and even on a machine with 32GB RAM. I tried it on a Windows and a Linux machine.
I am using ICEM 12.1.
Is it possible that the geometry/blocking is the reason for the problem? Or do you guys have some other hints for me?
Maybe the replay-function is the problem. I sometimes get weird errors when I am loading a replay-file. Also I cant replay my commands from the beginning to the end. I dont know why this is happening.
I tried building my mesh on ICEM 11.0 without using the replay-function. This time I can create the Multiblock Mesh but I get an error writing the data out (Output/Write Input).
Running ICEM CFD/CAE Multi-block Info Vers. 5.0.0 Error in unsh_gsfdims, idomnum=2 Error exit in unsh_gsfdims Error creating multi-block neutral files... child process exited abnormally Done Done with translation.
I am using Multiblock-info / Nastran solver. It seems that the .dom files were created correctly, but the .topo file isnt complete.
Any help is appreciated.
|June 24, 2011, 12:29||
Retired from CFD Online
Join Date: Mar 2009
Location: Ann Arbor, MI
Blog Entries: 1Rep Power: 38
Sorry, not sure what the problem is... I suggest you contact tech support in Hanover for something this serious.
But if you are using MSC Nastran, be aware that it does not support pyramid elements, so you will need to be careful about using MultiZone meshing with Hexa and Tetra since it will use Pyramids to join them. You will need to make sure it is either all hexa or no hexa.
|Thread||Thread Starter||Forum||Replies||Last Post|
|[ANSYS Meshing] Workbench 13: Structured Hexa Meshes||rooftop||ANSYS Meshing & Geometry||19||March 31, 2016 02:33|
|PEM Fuel cell module meshes. ICEM vs workbench||aarvay||FLUENT||22||January 26, 2016 00:47|
|[ICEM] complex 2D meshing on ICEM||kassab||ANSYS Meshing & Geometry||26||April 14, 2014 21:02|
|From ICEM 12.1 to a GIS software||Youen||ANSYS Meshing & Geometry||1||February 5, 2011 14:31|
|Design Modeler to ICEM.....||Joe||CFX||0||January 24, 2008 04:39|