[ICEM] 2d Aerofoil meshing in ansys ICEM

syler3321 · July 20, 2011, 00:32

Hi,
I noticed that in the ansys icem meshing video on aerofoil (Part 1/3 at 1.11 minute), Simon managed to get an edge that is curved at the leading edge. How did he do this?
This is the video link:-
http://www.youtube.com/watch?v=tYrbScUH9RE

Another question is: i'm trying to mesh a triangular mesh around my aerofoil with a prismatic layer but i cannot seem to do this. I created a surface, cut the aerofoil from the surface, go to global mesh and set all the criteria. In Shell meshing parameters i set it as all tri. Then i go to prism meshing parameters and set my layers and i even turned on the 2d boundary layer in advanced prism meshing parameters. When i clicked compute mesh, no mesh appeared. Did i miss a step?

Regards
Ralph

syler3321 · July 25, 2011, 16:59

I managed to solve my problem. I'm beginning to like ICEM

cfd seeker · February 3, 2012, 01:59

how u managed to solve your problem. I am also stuck up in the triangular meshing of aerofoil. In some cases mesh is formed on the surface of aerofoil which is ofcourse wrong. How to cut aerofoil from the surface? how to apply size function in the meshing? how to apply prisms and density box?

July 20, 2011, 00:32	2d Aerofoil meshing in ansys ICEM	#1
syler3321 Member ralph Join Date: Jun 2010 Location: Calgary Alberta Posts: 38 Rep Power: 15	Hi, I noticed that in the ansys icem meshing video on aerofoil (Part 1/3 at 1.11 minute), Simon managed to get an edge that is curved at the leading edge. How did he do this? This is the video link:- http://www.youtube.com/watch?v=tYrbScUH9RE Another question is: i'm trying to mesh a triangular mesh around my aerofoil with a prismatic layer but i cannot seem to do this. I created a surface, cut the aerofoil from the surface, go to global mesh and set all the criteria. In Shell meshing parameters i set it as all tri. Then i go to prism meshing parameters and set my layers and i even turned on the 2d boundary layer in advanced prism meshing parameters. When i clicked compute mesh, no mesh appeared. Did i miss a step? Regards Ralph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Strange ANSYS Meshing 13.0 Problem	brunob	ANSYS Meshing & Geometry	3	June 21, 2011 20:03
[ANSYS Meshing] Ansys Meshing Vs ICEM	jocarsa	ANSYS Meshing & Geometry	2	May 10, 2011 04:33
Mesh generation tool	AMusteykis	ANSYS Meshing & Geometry	7	March 22, 2010 12:06
Missing tets along line when meshing with ICEM CFD	Georges P. Côté	CFX	6	March 23, 2006 00:34
Icem Hexa 2d aerofoil meshing	Ste Lakey	CFX	0	August 25, 2004 07:05

July 25, 2011, 16:59		#2
syler3321 Member ralph Join Date: Jun 2010 Location: Calgary Alberta Posts: 38 Rep Power: 15	I managed to solve my problem. I'm beginning to like ICEM

February 3, 2012, 01:59		#3
cfd seeker Senior Member Join Date: Mar 2011 Location: Germany Posts: 552 Rep Power: 20	how u managed to solve your problem. I am also stuck up in the triangular meshing of aerofoil. In some cases mesh is formed on the surface of aerofoil which is ofcourse wrong. How to cut aerofoil from the surface? how to apply size function in the meshing? how to apply prisms and density box?