[GAMBIT] Mesh renumbering

mahzad · August 28, 2011, 04:54

Hi Every one
I have generated a grid in gambit and exported its nodal coordinate and nodal coonnectivity information. now I want to know is it any way or software in order to help me to do renumbering because I'm going to reduce the bandwidth of my matrix. If anyone have any information about taht help me please!
I'll really appreciated

-mAx- · August 29, 2011, 02:05

you can do that in your solver.
For instance:
*In Fluent 6.3, you could use Reordering: grid/reorder
*In OF, you can use RenumberMesh utility

mahzad · August 31, 2011, 01:17

But I have another question. Because I don't want to work with fluent, and I am going to write a code myself it is important to know is it anyway to control the way of node and cell numbering?
when I checked grid order it just change bandwidth and reported it but I want to know how the node and cell numbering has been changed?
I look forward to hearing fome you.
yours faithfully

-mAx- · August 31, 2011, 01:31

I don't think you can reordering your grid or modify its numbering or whatever within gambit.
Check the user guide

August 28, 2011, 04:54	Mesh renumbering	#1
mahzad Member mahzad_kh Join Date: Jun 2010 Posts: 38 Rep Power: 15	Hi Every one I have generated a grid in gambit and exported its nodal coordinate and nodal coonnectivity information. now I want to know is it any way or software in order to help me to do renumbering because I'm going to reduce the bandwidth of my matrix. If anyone have any information about taht help me please! I'll really appreciated

August 29, 2011, 02:05		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 40	you can do that in your solver. For instance: In Fluent 6.3, you could use Reordering: grid/reorder In OF, you can use RenumberMesh utility __________________ In memory of my friend Hervé: CFD engineer & freerider

August 31, 2011, 01:17	node and cell renumbering??	#3
mahzad Member mahzad_kh Join Date: Jun 2010 Posts: 38 Rep Power: 15	But I have another question. Because I don't want to work with fluent, and I am going to write a code myself it is important to know is it anyway to control the way of node and cell numbering? when I checked grid order it just change bandwidth and reported it but I want to know how the node and cell numbering has been changed? I look forward to hearing fome you. yours faithfully

August 31, 2011, 01:31		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 40	I don't think you can reordering your grid or modify its numbering or whatever within gambit. Check the user guide __________________ In memory of my friend Hervé: CFD engineer & freerider

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 06:41
[snappyHexMesh] non-smooth mesh	Svensson	OpenFOAM Meshing & Mesh Conversion	11	January 18, 2012 09:13
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
2d irregular grid	Remy	Main CFD Forum	1	December 22, 2008 04:49
basic of mesh refinement	arya	CFX	4	June 19, 2007 12:21