CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Workbench: rotate a sketch..Please Help! (https://www.cfd-online.com/Forums/ansys-meshing/92040-workbench-rotate-sketch-please-help.html)

noa August 31, 2011 06:50
Workbench: rotate a sketch..Please Help!
 
Hi,

Is it possible to rotate a 2D sketch in workbench?
for example: a coordinate (0,1) will change to (-1,0).

Thank you,

Mohankumarg12 August 31, 2011 09:16
2D- sketch rotation
 
yes you can rotate it using move command in modify.

Enter the degree in the box provided--- select the curves----Right click and select the paste handle or select default paste handle-------Again right click and select rotate by r degrees------Again right click and select the paste at plane origin ------- ESC.

Khan_CFD May 25, 2021 07:43
Quote:
Originally Posted by Mohankumarg12 (Post 322393)
yes you can rotate it using move command in modify.

Enter the degree in the box provided--- select the curves----Right click and select the paste handle or select default paste handle-------Again right click and select rotate by r degrees------Again right click and select the paste at plane origin ------- ESC.

This was very helpful... Thank you


All times are GMT -4. The time now is 20:09.