[ICEM] 3d mesh around a wing using ICEM

artemis64s · May 24, 2010, 13:09

Hi,
I'm trying to do a structured mesh for a 3D Wing geometry on ICEM. i have made a wing geometry and imported it to ICEM using the iges format. Next, i have a rectangular flow domain using the create point on the geometry. Furthermore, i have created a block '3D bounding box' and associate the edges. Now, how to proceed next? I have been unable to generate a volume mesh? When i use the Update Mesh button, it only generates the mesh on the surfaces.. Any ideas would be appreciated as to what is the problem..

Furthermore, can anybody tell me how to create a simple o-block around the wing. My wing is tapered.

Thanking in anticipation.

PSYMN · June 21, 2010, 10:51

Sorry, I am a month late getting to this question (I have been busy). Perhaps it is too late and you have figured it out and moved on... Or perhaps not.

There have been a few other questions on meshing wings recently, so I will try to take care of them all at once.

Can you tell me a little more about yours? Is the tip rounded? Is the trailing edge sharp, flat or rounded?

Also, reading your question again, perhaps your problem isn't with the topology... But is with getting a volume mesh... In ICEM CFD Hexa, we initially work with Premesh. This is more rapidly generated than an unstructured mesh and can be the precursor for either unstructured or multiblock structured mesh. If you want either of these other formats, you should right click on premesh and convert.

If you convert to unstructured mesh, it will load an unstructured mesh that you can export to your solver.

Perhaps going thru some tutorials would help with these procedural issues.

kepeng · June 22, 2010, 09:08

Expecting for your new post!
airfoil: round tip, sharp trailing edge
and the wing with same root and end airfoil, with an round end cap.

albatrossmechanic · August 13, 2010, 09:21

hi I am a beginner working with ICEM and I have a problem.when I,m trying to use orthogonality method for my sketch which is an airfoil in a designed domain,my mesh will be distroyed and I just don't know how to fix it?please help me

kashyap · November 20, 2010, 08:49

hey can any1 help me in going about to mesh a 3D naca0012 in ansys 12.1..... i've tried but failed several times.. pls can any1 help

KKPradeep · September 23, 2011, 06:13

Can anyone help in providing the NACA 0012 wing with wing span 2.791mt, root chord 0.29mt, tip chord 0.40mt

PSYMN · September 23, 2011, 07:59

http://www.ppart.de/aerodynamics/profiles/NACA4.html

May 24, 2010, 13:09	3d mesh around a wing using ICEM	#1
artemis64s New Member artemis Join Date: May 2010 Posts: 8 Rep Power: 15	Hi, I'm trying to do a structured mesh for a 3D Wing geometry on ICEM. i have made a wing geometry and imported it to ICEM using the iges format. Next, i have a rectangular flow domain using the create point on the geometry. Furthermore, i have created a block '3D bounding box' and associate the edges. Now, how to proceed next? I have been unable to generate a volume mesh? When i use the Update Mesh button, it only generates the mesh on the surfaces.. Any ideas would be appreciated as to what is the problem.. Furthermore, can anybody tell me how to create a simple o-block around the wing. My wing is tapered. Thanking in anticipation.

June 21, 2010, 10:51	Late better than never?	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Sorry, I am a month late getting to this question (I have been busy). Perhaps it is too late and you have figured it out and moved on... Or perhaps not. There have been a few other questions on meshing wings recently, so I will try to take care of them all at once. Can you tell me a little more about yours? Is the tip rounded? Is the trailing edge sharp, flat or rounded? Also, reading your question again, perhaps your problem isn't with the topology... But is with getting a volume mesh... In ICEM CFD Hexa, we initially work with Premesh. This is more rapidly generated than an unstructured mesh and can be the precursor for either unstructured or multiblock structured mesh. If you want either of these other formats, you should right click on premesh and convert. If you convert to unstructured mesh, it will load an unstructured mesh that you can export to your solver. Perhaps going thru some tutorials would help with these procedural issues.

August 13, 2010, 09:21	ICEM beginner	#4
albatrossmechanic New Member nasim Join Date: Jul 2010 Posts: 2 Rep Power: 0	hi I am a beginner working with ICEM and I have a problem.when I,m trying to use orthogonality method for my sketch which is an airfoil in a designed domain,my mesh will be distroyed and I just don't know how to fix it?please help me

November 20, 2010, 08:49	Trying to mesh 3D Naca0012	#5
kashyap New Member Kashyap Join Date: Nov 2010 Posts: 2 Rep Power: 0	hey can any1 help me in going about to mesh a 3D naca0012 in ansys 12.1..... i've tried but failed several times.. pls can any1 help

September 23, 2011, 06:13	ICEM CFD NACA 0012 3D modelling	#6
KKPradeep New Member Pradeep Join Date: Aug 2011 Posts: 2 Rep Power: 0	Can anyone help in providing the NACA 0012 wing with wing span 2.791mt, root chord 0.29mt, tip chord 0.40mt

June 22, 2010, 09:08		#3
kepeng New Member Ke peng Join Date: Jul 2009 Posts: 19 Rep Power: 16	Expecting for your new post! airfoil: round tip, sharp trailing edge and the wing with same root and end airfoil, with an round end cap.

September 23, 2011, 07:59	Just google it...	#7
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	http://www.ppart.de/aerodynamics/profiles/NACA4.html __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when converting mesh (made by ICEM) using fluentMeshToFoam	Forrest_Lei	OpenFOAM	11	October 16, 2009 06:28
Boddy fitted Hexcore Mesh in ICEM Cfd	Mitch	CFX	0	December 29, 2008 06:07
How to corse mesh in icem cfd?	Priety	CFX	2	October 2, 2006 03:57
CFX mesh & ICEM	mike	CFX	3	April 27, 2006 15:27
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks !	Vu Trinh Tuan	CFX	11	March 28, 2005 19:04