CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] mesh in hollow pipe (https://www.cfd-online.com/Forums/ansys-meshing/94029-mesh-hollow-pipe.html)

murugesanjeyabalan November 3, 2011 08:28
mesh in hollow pipe
 
hi
how to mesh hollow pipe?

by
j.murugesan

Sushilkumar November 3, 2011 08:46
You want to generate the surface mesh only..?

murugesanjeyabalan November 4, 2011 02:35
software: ANSYS FLUENT 13.

i need to mesh the working fluid (air) also

by
murugesan.j

Sushilkumar November 4, 2011 11:43
You should have a solid volume for the domain you want to mesh. Better you get the solid cylinder generated and then mesh it.

PSYMN November 4, 2011 20:45
Even the most basic tutorial should answer this question for you. There are some built into the software and a bunch more on the customer portal.

murugesanjeyabalan November 5, 2011 04:18
how to mesh channel (like 'c' type) with working fluid as air in ANSYS WORKBENCH.

BY
J.MURUGESAN

alexsatan November 11, 2011 21:24
Quote:
Originally Posted by murugesanjeyabalan (Post 330809)
how to mesh channel (like 'c' type) with working fluid as air in ANSYS WORKBENCH.

BY
J.MURUGESAN
Hi :
Just cut your mold will be OK .Enjoy!

BY
Alex


All times are GMT -4. The time now is 21:59.