CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] DesignModeler Crashing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2013, 10:29
Default DesignModeler Crashing
  #1
New Member
 
Join Date: Oct 2012
Location: NC
Posts: 7
Rep Power: 13
gcam4 is on a distinguished road
I'm attempting the: Setting Up and Solving a Cold Flow IC Engine Problem - Part 1 of 2 v14.5 tutorial and when doing the steps where DesignModeler is used it will crash constantly. I cannot even exit DesignModeler without it crashing. Here is a list of things that make it crash:


1. attempting to exit design modeler without doing anything other than opening and then closing
2. add new IC Valves Data Group (pg. 70 in pdf)
3. attempting to create a plane (this particular step isn't in this tutorial but I've tried it and it still freezes)
4. attempting to edit the input manager; I tried this after knowing that the next step would make it crash, I would save the file and then attempt to edit input manager, it would freeze.

We use Red Hat Enterprise Linux 5

I have our schools IT department working on a solution but I figured I would ask this forum.
gcam4 is offline   Reply With Quote

Old   March 18, 2013, 20:02
Default
  #2
New Member
 
Join Date: Oct 2012
Location: NC
Posts: 7
Rep Power: 13
gcam4 is on a distinguished road
Does anyone have any ideas as to what the problem is? I have submitted a ticket with Ansys but haven't heard back from them yet. I've tried several other tutorials and anytime I use designmodeler it will crash.
gcam4 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[DesignModeler] DesignModeler Scripting: How to get Full Command Access ANT ANSYS Meshing & Geometry 53 February 16, 2020 16:13
Physical size of geometry in DesignModeler Michael Rasmussen CFX 9 June 16, 2017 04:27
[DesignModeler] find features of Gambit in DesignModeler code_source ANSYS Meshing & Geometry 13 April 30, 2014 08:33
[Other] exchange of parameter values between TurboGrid and DesignModeler in Workbench la7low ANSYS Meshing & Geometry 2 February 21, 2011 16:12
DesignModeler Keyboard Shortcuts rwryne ANSYS 0 February 4, 2010 12:24


All times are GMT -4. The time now is 01:55.