CFD Online Discussion Forums

CFD Online Discussion Forums (
-   ANSYS Meshing & Geometry (
-   -   [ANSYS Meshing] Micro channel waterblock meshing. (

codenamew January 2, 2012 10:55

Micro channel waterblock meshing.

I would like to ask for advices on how to mesh a micro channel waterblock design in Ansys. I have tried using ANSYS Meshing to mesh the waterblock but end up with the error not enough memory. I used a patch conforming tet method to mesh it. I am afraid that the method that I used is incorrect thus I would like to ask for advice and guidance from the seniors at CFD online. Thanks.

All times are GMT -4. The time now is 12:07.