 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] Radial biasing on mapped face mesh |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 3, 2012, 06:24
|
Radial biasing on mapped face mesh
|
#1 |
|
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 733
Rep Power: 25  |
Hi,
How can the elements be clustered at the inner and outer surfaces in the radial direction of this cylinder mesh in ANSYS Meshing v14? I can only get element biasing along the cylinder length as an option is given in the sweep method. I cannot use inflation whilst using a sweep method and no other option are given. Thanks |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
| [snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
| (gambit)projecting just a part of mesh on another face? | gholamghar | ANSYS Meshing & Geometry | 2 | March 14, 2011 17:14 |
| [GAMBIT] Changing Face mesh color | ibuki | ANSYS Meshing & Geometry | 1 | June 7, 2010 01:24 |
| [blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 07:36 |
Linear Mode
