[beagle2]

This is slightly embarassing....

I have started working through the DM tutorials and have "lost" my graphics window. Despite trawling through the menus, I can not get it back.

I have tried View>windows>reset layout, with no luck. And have restarted machine etc.

Only "Details View" and "Tree Outline" are visible.

Any ideas greatly recieved.

[beagle2]

Any takers?

User preferences must be stored is some file somewhere on the computer. I need to find it and delete it. Is it in the v110 folder?

Or does anyone know of a short cut key to view the graphics window?

[Far]

Only "Details View" and "Tree Outline" are visible.

Anyone who is stucked in this problem

1. Move graphics window, tree online and detailsview randomly

2. Now go to View > Reset Graphics layout

[jmboac]

Hi,

What if even if I move the windows, I still cannot find the option "Reset Layout" under the View-->Windows. I can see Section Planes but that is not active.

Thank you in advance.

Originally Posted by Far

Anyone who is stucked in this problem

1. Move graphics window, tree online and detailsview randomly

2. Now go to View > Reset Graphics layout

[Kapi]

Hi jmboac,

just play with the windows, there will be a "Pin" located on right top of each window as shown in pics posted by Far, just click on it and see if graphic window comes back

Also check if its not "read only mode" and bottom left says "ready" in design modeler

Hope it helps

Kapi

[Pospelov]

Hi,
I've got some problem. I don't know how to fix it.
The "Details View" is missing. And the windows is separated.
There is no "Reset Graphics layout" in the "View" menu.
Thank you.
Alexander.

[pradip.c1000]

Hi Friends this problem has occurred today with one of my friend, you have to drag each window to centre where you can see joystick buttons keep them on required side of buttons and they will get fixed there.

[Ahmed Saeed Mansour]

Originally Posted by pradip.c1000

Hi Friends this problem has occurred today with one of my friend, you have to drag each window to centre where you can see joystick buttons keep them on required side of buttons and they will get fixed there.

That's right

[Touré]

The problem still exist in 2017 on Ubuntu 16.04 TLS. Maybe it's about OS or bad installation or a bug that's not yet fixed .... I did not have the problem on Windows but Ansys workbench keeps constantly crashing every 5 or 10 minutes with a mesh around 1,000,000 elements on Ubuntu 16.04 LTS. By the way, the Window> Reset Layout from the View menu is missing on Ubuntu. This is a nightmare! You have to play between pin and unpin until you get the windows fit into their places. I can't believe that I have to spend fifteen minutes to replace windows in 2017.

[Ahmed Saeed Mansour]

Hello, I double click on the blue bar at the top of the window that I need to place it at its original location and it works fine without touching any more windows and make the situation messy ...Thanks

[Touré]

Thank you Mansour you saved my life.

[Touré]

Double clicking on the blue bar at the top of each window fixed the problem. However, all the windows have to be pinned. Things still get messy even with the double click when some of the windows are unpinned while others are pinned.

[Kvaibhav]

Just go to VIEW tab at top bar>Go to bottomost WINDOWS>click on RESET LAYOUT. as simple as that

[cwl6750084]

Originally Posted by Kvaibhav

Just go to VIEW tab at top bar>Go to bottomost WINDOWS>click on RESET LAYOUT. as simple as that

There is no WINDOWS > RESET LAYOUT manual in my Design Modeler as well.

[chelsea]

THank you so much! save my day.

[Ahmed Saeed Mansour]

You are welcome guys

[kansaldehyde]

Hey friends,

The "details view" is missing from my design modeller, ansys 19. I am not able to find any window reset option.
any takers?

[Ahmed Saeed Mansour]

Hello, send a snapshot please, I only see reset in view menu in Ansys (The products appear at your left hand, not inside the modeler)...Thanks

[kansaldehyde]

as I'm trying to edit slice, but details view is absent.
Under view->windows, reset to defaults is missingdesign modeller.jpg

no view ansys.png

[Ahmed Saeed Mansour]

Hello, it is normal to not to see it in design modeler, try to check out how to deal with toolbars of view problems from the design modeler user guide Or simply try to check out every option you have in the menus.
Thanks