igestotin batch command
 

Hi Guys

Does anyone know what happened to the ic_trans_step_tetin command in Ansys 14.0? My script that worked fine on Ansys 13.0 no longer works with the new version. The command and error are as follows:

med> ic_trans_step_tetin /home/sbuc9/geo/BODY.stp /home/sbuc9/geo/BODY.stp 0 {} 0 {}

"/usr/ansys_inc/v140/icemcfd/linux64_amd/dif/iges/igestotin" {} "/home/sbuc9/geo/BODY.stp" "/home/sbuc9/geo/BODY.stp"
/usr/ansys_inc/v140/icemcfd/linux64_amd/dif/iges/igestotin_exec: Command not found.

Any help would be greatly appreciated,

Thanks
Stu

Never mind, sorted it out. As is usually the case in anything Linux, the libraries were incomplete. For those who may happen to come across the same problem, try:

yum install libXt.{i686,x86_64}
yum install compat-libstdc++-33-3.2.3-69.el6.i686