CFD Online Discussion Forums

CFD Online Discussion Forums (
-   ANSYS Meshing & Geometry (
-   -   [ANSYS Meshing] Bias (

clohesca April 5, 2012 01:55

1 Attachment(s)

I am fairly new to ANSYS and have a question about meshing.

I am modelling a self buried pipeline and need to have an initial cell size of around 0.001 (near the seabed).

I can get this with bias using 80 divisions and a bias factor of 800.

My domain is 10D in y direction (height) and 40D in x direction with the pipe sitting at 20D (half way along).

I have attached some pictures of my geometry.

Help would be greatly appreciated.


All times are GMT -4. The time now is 17:49.