CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Bias

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 5, 2012, 02:55
Default Bias
  #1
New Member
 
Cameron
Join Date: Mar 2012
Posts: 1
Rep Power: 0
clohesca is on a distinguished road
Hi,

I am fairly new to ANSYS and have a question about meshing.

I am modelling a self buried pipeline and need to have an initial cell size of around 0.001 (near the seabed).

I can get this with bias using 80 divisions and a bias factor of 800.

My domain is 10D in y direction (height) and 40D in x direction with the pipe sitting at 20D (half way along).

I have attached some pictures of my geometry.

Help would be greatly appreciated.

Cam
Attached Images
File Type: jpg NEW.jpg (98.6 KB, 49 views)
clohesca is offline   Reply With Quote

Reply

Tags
bias, bias factor, divisions, mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] edge sizing control--Calculate cell-to-cell expansion rate from bias factor la7low ANSYS Meshing & Geometry 6 December 19, 2021 07:49
[ANSYS Meshing] Bias and Bias Factor Hybrid ANSYS Meshing & Geometry 7 April 19, 2017 00:56
bias mesh kbasnet ANSYS Meshing & Geometry 1 March 2, 2011 21:52


All times are GMT -4. The time now is 14:17.