Simplifying CAD Geometry

dsking · September 7, 2012, 17:17

Does anyone know of useful tutorials or guidelines for simplifying an imported CAD geometry in the Design Modeler?

I would like to run a Fluent simulation using an exisiting Pro-E design but it has many small features (i.e. holes, corners, edges, etc.) that are unnecessary/unfriendly for CFD analysis.

Thanks.

caddesign9 · September 13, 2012, 07:39

Hello friends:

Greetings!

I would like to introduce myself as entrepreneur running small CAD setup.

Hope I enjoy posting here and you guys may benefit from my insights in CAD industry!

Regards
Richard

ABF · September 13, 2012, 08:26

Would it not be easier to simplify the model in its native format, save it as a simplified model, and then import it?

dsking · September 13, 2012, 12:28

Richard: Hello, any help/guidelines you could offer on simplifying a geometry for CFD analysis would be greatly appreciated.

ABF: I am not sure, the geometry's native format is Pro-E and I am not very experienced in Pro-E so I would rather use Design Modeler if possible.

September 7, 2012, 17:17	Simplifying CAD Geometry	#1
dsking New Member dking Join Date: Aug 2012 Posts: 12 Rep Power: 13	Does anyone know of useful tutorials or guidelines for simplifying an imported CAD geometry in the Design Modeler? I would like to run a Fluent simulation using an exisiting Pro-E design but it has many small features (i.e. holes, corners, edges, etc.) that are unnecessary/unfriendly for CFD analysis. Thanks.

September 13, 2012, 07:39	Hi	#2
caddesign9 New Member Richard Bothom Join Date: Sep 2012 Posts: 1 Rep Power: 0	Hello friends: Greetings! I would like to introduce myself as entrepreneur running small CAD setup. Hope I enjoy posting here and you guys may benefit from my insights in CAD industry! Regards Richard

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Import geometry from CAD	Giuseppe (Giuseppe)	OpenFOAM Pre-Processing	34	December 14, 2017 16:24
Importing CAD geometry and Editing edges to match	Ahmed	CFX	15	March 21, 2016 12:39
vitual _ real	deneb	FLUENT	3	January 22, 2007 04:31
meshing with flawed CAD geometry	kevin buhra	Main CFD Forum	3	January 28, 2004 01:31
Meshing of imported 2-D CAD geometry in STAR-CD	Haris Maharana	Siemens	1	June 30, 2000 13:48

September 13, 2012, 08:26		#3
ABF New Member Adam Falshaw Join Date: Sep 2012 Posts: 11 Rep Power: 13	Would it not be easier to simplify the model in its native format, save it as a simplified model, and then import it?

September 13, 2012, 12:28		#4
dsking New Member dking Join Date: Aug 2012 Posts: 12 Rep Power: 13	Richard: Hello, any help/guidelines you could offer on simplifying a geometry for CFD analysis would be greatly appreciated. ABF: I am not sure, the geometry's native format is Pro-E and I am not very experienced in Pro-E so I would rather use Design Modeler if possible.