Home > Forums > Software User Forums > ANSYS

Save geometry as STL from ICEM CFD

Mark Forums Read

Reply

Search this Thread

September 10, 2013, 17:32	Save geometry as STL from ICEM CFD	#1
summerdream New Member Join Date: Apr 2013 Posts: 3 Rep Power: 14	Hi, I am wondering if there is a way to save geometry as STL file in ICEM CFD. Save geometries under File can only save as .tin or .tin.gz. Thanks.

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Import Mesh from ICEM CFD to CFX	Andre Almeida	CFX	16	April 19, 2016 04:42
Using ICEM CFD to repair/edit ANSYS Meshing	Kaaji1359	ANSYS	2	July 30, 2013 11:28
ICEM CFD to CFX geometry and mesh	Luca	CFX	6	February 4, 2010 17:31
editing STL file in ICEM CFD	shaan	Main CFD Forum	1	January 22, 2007 09:34
Create STL from ICEM CFD?	Michael B	CFX	0	November 2, 2006 09:35

All times are GMT -4. The time now is 01:41.