CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Fluent/filter/porous jump/pipe

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 3, 2014, 15:00
Smile Fluent/filter/porous jump/pipe
  #1
New Member
 
Kevin
Join Date: May 2014
Posts: 3
Rep Power: 11
KevinC is on a distinguished road
Hi everyone
I'm trying to simulate a flow through a strainer (filter) in a pipe with a well-rounded expansion before, and an 90 degrees elbow after it, in 3D, using Fluent. To simplify, just considerate a pipe with a 'filter' inside : To do that I've modeled the filter as porous jump.
__________________________________________________ _______________
!wall
-------------------------------------------!
inlet !wall filter outflow
-------------------------------------------!
________________________________________________!w all_____________


My boundary conditions are : Velocity_inlet - Outflow - Wall - and Porous jump

From the experimental data I get the permeability and the pressure jump coefficient for the porous jump condition.
I run it with a k-omega turbulence model.

But the results are not correct, it seems that it doesn't use the porous jump, and something weird, the pressure is higher after the filter, but it should be the contrary..

Any help would be appreciated

Thanks
Regards

Kevin
KevinC is offline   Reply With Quote

Reply

Tags
filters, fluent 14, porous jump bc, pressure drop

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 04:40.