Visualize the trapped particle coordinates at the wall

Saidul · December 1, 2014, 19:02

Hello,
I have the trapped particle coordinates in .txt file and I would like to visualize it at the wall. I am using ANSYS FLUENT for my simulations. My case is 3D. How can I visualize the particles by using its coordinates?

Thanks in advance for your help.

Regards,
Saidul

edoan · December 2, 2014, 09:03

You can Visualize the trapped particles by enabling the accretion option in the DPM settings. With this option you can display where the particles are accumulating on the wall with contours

Saidul · December 2, 2014, 19:29

Quote:

Originally Posted by edoan

You can Visualize the trapped particles by enabling the accretion option in the DPM settings. With this option you can display where the particles are accumulating on the wall with contours

I enabled the Accretion option from the physical model of DPM. Could you please tell me how can I do it? I will be happy if you tell me the detail procedure.

Thanks in advance for your support.

Regards,
Saidul

edoan · December 3, 2014, 10:36

Hey Saidul, Once the option is enabled and you have run your sim the procedure is the same as if you were plotting velocity or pressure contours on a surface. Select the surface you want to see the accretion (must be "trap" surface in the particle boundary conditions or you wont see anything) and select "particle accretion" from the list of variables availbe to plot.

Saidul · December 3, 2014, 18:02

Hi Edoan,
Thanks for your help.

December 1, 2014, 19:02	Visualize the trapped particle coordinates at the wall	#1
Saidul Member S. Morichika Join Date: Aug 2014 Posts: 62 Rep Power: 11	Hello, I have the trapped particle coordinates in .txt file and I would like to visualize it at the wall. I am using ANSYS FLUENT for my simulations. My case is 3D. How can I visualize the particles by using its coordinates? Thanks in advance for your help. Regards, Saidul

December 2, 2014, 09:03		#2
edoan Member Ethan Doan Join Date: Oct 2012 Location: Canada Posts: 90 Rep Power: 13	You can Visualize the trapped particles by enabling the accretion option in the DPM settings. With this option you can display where the particles are accumulating on the wall with contours Saidul likes this.

December 3, 2014, 10:36		#4
edoan Member Ethan Doan Join Date: Oct 2012 Location: Canada Posts: 90 Rep Power: 13	Hey Saidul, Once the option is enabled and you have run your sim the procedure is the same as if you were plotting velocity or pressure contours on a surface. Select the surface you want to see the accretion (must be "trap" surface in the particle boundary conditions or you wont see anything) and select "particle accretion" from the list of variables availbe to plot. rmn_990 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Divergence in AMG solver!	marina	FLUENT	20	August 1, 2020 11:30
[Commercial meshers] Fluent3DMeshToFoam	simvun	OpenFOAM Meshing & Mesh Conversion	50	January 19, 2020 15:33
Radiation interface	hinca	CFX	15	January 26, 2014 17:11
LES in DES can't be actived!	shenying0710	CFX	17	January 23, 2014 04:45
visualize wall deposition	Jovana	FLUENT	2	May 11, 2011 08:30

December 3, 2014, 18:02		#5
Saidul Member S. Morichika Join Date: Aug 2014 Posts: 62 Rep Power: 11	Hi Edoan, Thanks for your help.