|
[Sponsors] |
APDL - "Pivot Error" when adding certain members |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 30, 2015, 11:08 |
APDL - "Pivot Error" when adding certain members
|
#1 |
New Member
chris lees
Join Date: Jan 2015
Posts: 1
Rep Power: 0 |
I'm currently creating a model of a car chassis, I get to a point where the simulation (adding constraints and loads to observe deformed shape) works fine, but then adding in extra beams to the chassis I receive this error when clicking solve: "There are at least 1 small equation solver pivot terms" and it won't solve.
I'm creating these beams simply by adding two keypoints in the middle of existing elements and joining them with a line so I can't see why this would cause the simulation not to work, thanks in advance |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
chtMultiRegionSimpleFoam | samiam1000 | OpenFOAM Running, Solving & CFD | 39 | March 31, 2016 09:43 |
chtMultiRegionSimpleFoam: strange error | samiam1000 | OpenFOAM Running, Solving & CFD | 26 | December 29, 2015 23:14 |
Problems in my first attempt with chtMultiRegionSimpleFoam | zfaraday | OpenFOAM Running, Solving & CFD | 1 | April 8, 2014 19:20 |
Combine WB and APDL Mechanics - which licences? | Marabelle | ANSYS | 10 | July 22, 2013 10:32 |
Help with chtMultiRegionFoam | jbvw96 | OpenFOAM Running, Solving & CFD | 2 | December 26, 2010 18:16 |