about theta angle in bladegen

xyq916 · May 5, 2015, 20:55

i am a newer to bladegen, i cannot understand what is the theta angle. i am totally confused. can you help me? thanks!

Jiricbeng · June 10, 2015, 06:55

Let say you have a guide vane of the turbine in xy plane. Z is axis of rotation. The leading edge and trailing edge (LE and TE) are defined by the line in zx plane and by the theta angle (and can also be defined by beta angle). Theta determines a line from x+ axis (it is like polar coordinates). Theta is the angle between a line and x+ axis. For example if the turbine guide vane LE has theta 0°, the point of LE lies on x axis, if 90° it lies on y axis.

May 5, 2015, 20:55	about theta angle in bladegen	#1
xyq916 New Member Bruce Xiao Join Date: Jan 2015 Posts: 26 Rep Power: 10	i am a newer to bladegen, i cannot understand what is the theta angle. i am totally confused. can you help me? thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamic contact angle calculation in multiphaseInterFoam	rajeshchem	OpenFOAM	3	December 23, 2022 14:00
Bladegen Theta specification-centrifugal compresso	avk	CFX	2	April 5, 2019 13:31
specifying wrap angle in BladeGen	avk	CFX	1	April 5, 2019 13:19
Theta angle definition in BladeGen	Raul	CFX	2	November 1, 2012 11:02
[Netgen] Import netgen mesh to OpenFOAM	hsieh	OpenFOAM Meshing & Mesh Conversion	32	September 13, 2011 05:50

June 10, 2015, 06:55		#2
Jiricbeng Senior Member Jiri Join Date: Mar 2014 Posts: 200 Rep Power: 12	Let say you have a guide vane of the turbine in xy plane. Z is axis of rotation. The leading edge and trailing edge (LE and TE) are defined by the line in zx plane and by the theta angle (and can also be defined by beta angle). Theta determines a line from x+ axis (it is like polar coordinates). Theta is the angle between a line and x+ axis. For example if the turbine guide vane LE has theta 0°, the point of LE lies on x axis, if 90° it lies on y axis.