CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS (https://www.cfd-online.com/Forums/ansys/)
-   -   Simulation conditions (https://www.cfd-online.com/Forums/ansys/165772-simulation-conditions.html)

weigl January 25, 2016 12:22
Simulation conditions
 
5 Attachment(s)
I have been using the steps mentioned here to simulate a flow on the mesh images attached.

My flow conditions are:
  • Mach = 0.7
  • AoA = 1.49
  • Re= 9million

After 1000 iterations, I get really weird results. I have attached the images for those too. What am I doing wrong?

napoleonv January 25, 2016 12:51
Could you give some more detail about your domain and BC.

weigl January 25, 2016 13:24
Quote:
Originally Posted by napoleonv (Post 582388)
Could you give some more detail about your domain and BC.
what kind of detail?

if you mean by how i have set up, its a square shaped farfield. so there is velocity inlet, pressure farfield, symmetry and the walls for airfoil


All times are GMT -4. The time now is 11:54.