|
[Sponsors] |
March 28, 2016, 17:29 |
One Way FSI Incorrect Pressure Import
|
#1 |
New Member
Jon Jones
Join Date: Mar 2016
Posts: 1
Rep Power: 0 |
I'm setting up a one way FSI problem. I have solved the CFD and am looking to map the pressure results onto the corresponding solid surface. I have done this before without much issue, however in this case the import has been mapped incorrectly. The direction of the pressure is in the opposite direction and the magnitudes are incorrect. What is causing this and how can I fix it?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure Inlet VS velocity Inlet difference | Mohsin | FLUENT | 9 | January 4, 2021 10:34 |
Pressure Outlet Guage pressure | Mohsin | FLUENT | 36 | April 29, 2016 17:16 |
pressure import from csv to abaqus | varghese9 | Structural Mechanics | 0 | April 9, 2015 03:17 |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
Pressure BC for combustion chamber | Giuki | FLUENT | 1 | July 19, 2011 11:35 |