Workbench not responding
 

Hello guys, at first sry for my bad english (not my native language).

Like many posts here, Im having problem with Workbench/Fluent. Ill explain what is the problem and what ive done until now.

Problem: Every version that ive tried install, i had the same problem, when the workbench or Fluent is starting the program just lock and then appear (Not Responding). The 3 status of the License Manager is running (at least on status interface)

What I did so far:
At first i followed every step that the read me file was talking to do. But in each version (14.5, 15, 16 and 17) occurred the same problema.

Then i followed some solutions of the people from the forum:
- Delete the Licensing Paste and installed again
- Copy and Paste the pastes from the crack inside the installers
- Generate a license from the prograns inside the installers
- Installed with the Firewall Off and On, and tried to run the program with the firewall off and Allowing the program
- Installed with antivirus, antivirus inactived and without antivirus at all.
- Installed with the devices (bluetooh, local and wireless) off and on, as tried to run the program with the same config.

Ive trying to install this for about 18h, and all the time im having the same problem. I hope someone here can help me because im giving up, and I have just 1 month until showing my master paper =(.

Thanks and sry for the bad english.

Hi,
your english is fine =)

Why do you think it is a licence problem?

If its not a licence problem reinstalling your windows and trying again could be worth a try but save your data first!

Thx =). Worked perfect.

any other alternative
 

is there any other alternative to solve this problem, without re-installing windows