|
[Sponsors] |
Parametric Mesh with ICEM and Workbench fails to update |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 9, 2017, 09:20 |
Parametric Mesh with ICEM and Workbench fails to update
|
#1 |
New Member
Fabian Schicker
Join Date: May 2017
Posts: 3
Rep Power: 9 |
Hi,
I'm currently trying to do a CFX-Simulation with Workbench using an ICEM generated mesh with a parametric mesh size. However, when updating the design points, the new mesh is not transferred to the CFX Setup. In Workbench, I setup a CFX system containing the setup and connected an ICEM CFD cell to provide the mesh. In ICEM, I set the 'Global Mesh Size: Scale Factor' as a parameter. In the parameter variation, I defined multiple design points with different values for the Scale Factor. When I manually change the current parameter value and then update the mesh and setup cells, the change is effective and generates a larger or smaller mesh that is propagated to the CFX setup. However, when updating the design points via "Update All Design Points" or via the context menu of the Parameter Set, the mesh change is not propagated to the setup. When exporting the DPs I can see that the file size of the mesh files is different for each parameter, so the mesh is generated properly. The '.cfx' and '.def' files however do not change. Does anyone know a possible solution? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PEM Fuel cell module meshes. ICEM vs workbench | aarvay | FLUENT | 24 | March 2, 2020 07:50 |
[Workbench] import geo. and mesh from ICEM to workbench | ama294 | ANSYS Meshing & Geometry | 3 | March 3, 2016 04:02 |
How to import mesh from ICEM into Workbench? | Zhenbi | CFX | 8 | April 18, 2014 23:39 |
[ANSYS Meshing] Simple question.... :) Export ICEM mesh to Workbench | Craig | ANSYS Meshing & Geometry | 4 | April 4, 2014 20:25 |
ICEM A* or workbench for parametric modeling? | Sudharshani | CFX | 0 | June 30, 2009 01:40 |