|
[Sponsors] |
Imposed wall flux and imposed wall temperature |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Member
youhane kha
Join Date: Sep 2017
Posts: 36
Rep Power: 9 ![]() |
Hi everybody,
Can anyone help me with my probleme please? I applied a wall temperature (T=313K) as a boundary condition in a mixed convection probleme. everything was okey and the result is perfect: ![]() But when I try to impose a wall heat flux, the code does not react to the heat flux imposed even if I impose a great value ( q= 700 W/m2) the temperature of all the domain remain at 288K or 289K : ![]() |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
LK_
Join Date: Oct 2017
Posts: 16
Rep Power: 9 ![]() |
Could you post a picture of the boundary conditions you have used for both cases?
One thing that caught my eye in the second picture is that the temperature is almost the same through the plate while in the first one there is a clear distribution. |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Imposed wall flux and imposed wall temperature | youhane | Main CFD Forum | 0 | October 3, 2017 11:53 |
Imposed wall flux and imposed wall temperature | youhane | FLUENT | 1 | October 3, 2017 07:59 |
Problem with Turbulent Heat Flux Temperature boundary condition | Manuel CFD | OpenFOAM Running, Solving & CFD | 11 | March 17, 2016 16:12 |
wall heat flux 2D to 3D | Mat_fr | FLUENT | 3 | May 2, 2013 14:06 |
wall temperature fixedGradient in buoyantBoussinesqSimpleFoam | David_010 | OpenFOAM | 0 | February 8, 2010 11:05 |