Can't start FLUENT with Serial - "No cached password"

Naranas · November 8, 2017, 13:25

Hi!

I just started out learning ANSYS Fluent and I came across a problem.
I got the ANSYS Student version, if that's important.

I can start Fluent with no problems when I set the processing options in the launcher to "Parallel"
However, when I try to set it to "Serial" and start Fluent 2 things happen:

a) Fluent gives me this message:

"WARNING: No cached password or password provided.
use '-pass' or '-cache' to provide password"

b) It completely freezes and I have to kill it via Task Manager.

What am I doing wrong? Why is it working with parallel but not serial?

I tried installing the Intel MPI, even though I have an AMD processor. I then tried executing mpiexec -register, but even this didn't help :/

What should I do?

EDIT: Unfortunately, the parallel one doesn't work now either. Please help, I need it for a project ASAP :/

migue360 · November 29, 2017, 16:07

I had the same problem, this was my solution:
-Disable Windows Firewall
-Run Fluent
-Acept all connection permissions
-Able windows firewall
-Enjoy
(In my case, I have to disable firewall before running Fluent)

Amartuvshin · December 3, 2017, 11:42

It works. Thank you very much

.

S_G · February 27, 2018, 11:33

Hi,
I also have this problem when trying to start fluent (both through workbench and using just fluent directly). I'm using the student eddition of Ansys 19.0.
I have tried disabling the firewall as suggested however that only caused fluent to incounter further errors when trying to start.
Does anyone know of an alternative solution?

cfdesf1990 · May 2, 2018, 08:23

I have the same problem.
what do you mean from "-Accept all connection permissions"? What should I do?

November 8, 2017, 13:25	Can't start FLUENT with Serial - "No cached password"	#1
Naranas New Member Join Date: Nov 2017 Posts: 1 Rep Power: 0	Hi! I just started out learning ANSYS Fluent and I came across a problem. I got the ANSYS Student version, if that's important. I can start Fluent with no problems when I set the processing options in the launcher to "Parallel" However, when I try to set it to "Serial" and start Fluent 2 things happen: a) Fluent gives me this message: "WARNING: No cached password or password provided. use '-pass' or '-cache' to provide password" b) It completely freezes and I have to kill it via Task Manager. What am I doing wrong? Why is it working with parallel but not serial? I tried installing the Intel MPI, even though I have an AMD processor. I then tried executing mpiexec -register, but even this didn't help :/ What should I do? EDIT: Unfortunately, the parallel one doesn't work now either. Please help, I need it for a project ASAP :/

November 29, 2017, 16:07		#2
migue360 New Member Miguel Join Date: Nov 2017 Posts: 1 Rep Power: 0	I had the same problem, this was my solution: -Disable Windows Firewall -Run Fluent -Acept all connection permissions -Able windows firewall -Enjoy (In my case, I have to disable firewall before running Fluent) Amartuvshin likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
looking for a smart interface matlab fluent	chary	FLUENT	24	June 18, 2021 09:07
Problem in using parallel process in fluent 14	Tleja	FLUENT	3	September 13, 2013 10:54
FLUENT doesnt start	srinivas	FLUENT	1	May 7, 2007 12:15
new to fluent; where to start?	inderpreet singh	FLUENT	4	September 5, 2006 11:53
Fluent License Manager Start Up Script	Amadou Sowe	FLUENT	1	August 7, 2004 14:09

December 3, 2017, 11:42		#3
Amartuvshin New Member Amartuvshin Join Date: Dec 2017 Posts: 1 Rep Power: 0	It works. Thank you very much .

February 27, 2018, 11:33		#4
S_G New Member s Gray Join Date: Feb 2018 Posts: 1 Rep Power: 0	Hi, I also have this problem when trying to start fluent (both through workbench and using just fluent directly). I'm using the student eddition of Ansys 19.0. I have tried disabling the firewall as suggested however that only caused fluent to incounter further errors when trying to start. Does anyone know of an alternative solution?

May 2, 2018, 08:23		#5
cfdesf1990 New Member Fluidflow Join Date: Oct 2015 Posts: 24 Rep Power: 11	I have the same problem. what do you mean from "-Accept all connection permissions"? What should I do?