CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Mesh: faces with no faces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 21, 2018, 15:24
Default Mesh: faces with no faces
  #1
Member
 
Marcello Asciolla
Join Date: Apr 2018
Location: Italy
Posts: 43
Rep Power: 7
MarcelloAsciolla is on a distinguished road
I got this error passing a model from the "geometry" block to the "mesh" one.

"A body was processed that had faces with no facets. Mesh generation and mass property calculations may be impacted".

But I am not understanding it.

Are not the facets created from the faces, so after the creation of the mesh?

I mean that I expect this kind of error after the creation of the mesh, why do I get it when I am importing a geometry in the mesh section so before the creation itself?
What does this refer exactly?
MarcelloAsciolla is offline   Reply With Quote

Old   February 25, 2019, 10:53
Default
  #2
Senior Member
 
ali
Join Date: Oct 2009
Posts: 318
Rep Power: 17
alinik is on a distinguished road
did you have any luck finding out what was the problem?
alinik is offline   Reply With Quote

Old   March 1, 2019, 10:53
Default
  #3
Member
 
Marcello Asciolla
Join Date: Apr 2018
Location: Italy
Posts: 43
Rep Power: 7
MarcelloAsciolla is on a distinguished road
There was something wrong in the CAD model. I did a little simplification and everything worked fine.
MarcelloAsciolla is offline   Reply With Quote

Old   November 30, 2019, 06:33
Default
  #4
New Member
 
Aideal Zohary
Join Date: Feb 2019
Location: Malaysia
Posts: 28
Rep Power: 7
AidealZohary is on a distinguished road
Just for those who're still searching. I had the same problem with my Cad where i designed a wing with a rounded tip using loft in solidworks. I changed the approach by using surfacing and later used surface knit to change it into solid and now it works well.
AidealZohary is offline   Reply With Quote

Reply

Tags
faces, facets, geometry, mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Can't Shake Erros: patch type 'patch' not constraint type 'empty' BrendaEM OpenFOAM Meshing & Mesh Conversion 12 April 3, 2022 19:32
[Other] Mesh Importing Problem cuteapathy ANSYS Meshing & Geometry 2 June 24, 2017 06:29
[snappyHexMesh] SHM is not extruding/adding Layers everywhere matthiasd OpenFOAM Meshing & Mesh Conversion 2 October 16, 2016 17:45
[ICEM] Export ICEM mesh to Gambit / Fluent romekr ANSYS Meshing & Geometry 1 November 26, 2011 13:11
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 08:24.