I can't make my body rotating in transient structural
2 Attachment(s)
Dear All,
I just can't make my body rotating. I was using Ansys 16 some time ago and I do not remember having such troubles. Now in Ansys 19 my body is not rotating. https://www.cfd-online.com/Forums/at...1&d=1575319588 Forces: A Rotational Velocity along Z axis, 5 rad/s. Support: B Displacement X = free, Y= free, Z = 0, C Displacement X = 0, Y = 0, Z = free, Total Velocity https://www.cfd-online.com/Forums/at...1&d=1575319588 I believe there was a change in between those versions of Ansys that I was not being informed yet. Could You, please, tell me where I am doing mistake? Best regards, Oskar |
Hi Oskar :)
I did similar analysis in Ansys 2019R3 Student Trial and it works. I applied BC similar as you described. You didn't preceise so I applied Rotational Velocity by Geomtry Selection and Coordinate System (not by vector). |
Thank You for Your reply.
I tried Geometry Selection and for velocity I tried both Vector and Component setting without success. I tried with Cylindrical Coordinate System but components were still x, y and z requested in meters which does not seems to be correct. I believe I need to wait for an update of Ansys in my university. |
All times are GMT -4. The time now is 12:00. |