CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Remeshing for two different domain in Dynamic Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 11, 2020, 14:10
Default Remeshing for two different domain in Dynamic Mesh
  #1
New Member
 
bora
Join Date: Dec 2019
Posts: 1
Rep Power: 0
kaboka1 is on a distinguished road
Hello everyone,

I have two domain as solid plate and room in Fluent and a velocity inlet in the room. I would like to move the velocity inlet and see the temperature differences on the plate. In order to see that I´m using dynamic mesh with a UDF code. Everything is working very well till this part.

Remeshing and Smoothing modes are turned on and I set the velocity inlet as a rigid body and others as deforming bodies. Furthermore I have 6 prism layers between the solidplate and the room. However, when I preview the mesh motion prisim layers do not deform and they just stretch, thus after a time step it gives error. I played with the values in remeshing and deforming sections but could not find the right way to solve the problem. Could anyone have any idea how could I solve this problem? Thanks in advance.

Best regards
kaboka1 is offline   Reply With Quote

Reply

Tags
dynamicmesh, quenching, remeshing, smoothing, udf

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic Mesh Problem. Tom Clark FLUENT 10 June 21, 2021 05:27
Dynamic mesh Remeshing Saman95 FLUENT 0 June 18, 2019 03:06
Dynamic Mesh: Remeshing doesn´t work properly maccheese Fluent Multiphase 4 June 7, 2018 06:56
Error finding variable "THERMX" sunilpatil CFX 8 April 26, 2013 08:00
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10


All times are GMT -4. The time now is 20:41.