Working with FLUENT outside of Workbench

Светлана · April 1, 2020, 19:35

I have .agdb file for geometry, .meshdat and .msh for the mesh, and .cas for FLUENT setup. Workbench keeps bugging out on zero thickness surfaces, so I copied all these files into another directory. Modified the geometry.

1. How do I automatically update the mesh and setup from there automatically without opening each component by hand?

2. Manually updated the mesh. Opened FLUENT case. How do I import the mesh to replace the current mesh (not to have two meshes)? Update, found "/mesh/replace" in this thread, it seems to work.

Thanks.

karachun · April 3, 2020, 10:28

2. Or you can do File->Read->Mesh and select Replace Mesh.

April 1, 2020, 19:35	Working with FLUENT outside of Workbench	#1
Светлана Senior Member Svetlana Tkachenko Join Date: Oct 2013 Location: Australia, Sydney Posts: 407 Rep Power: 14	I have .agdb file for geometry, .meshdat and .msh for the mesh, and .cas for FLUENT setup. Workbench keeps bugging out on zero thickness surfaces, so I copied all these files into another directory. Modified the geometry. 1. How do I automatically update the mesh and setup from there automatically without opening each component by hand? 2. Manually updated the mesh. Opened FLUENT case. How do I import the mesh to replace the current mesh (not to have two meshes)? Update, found "/mesh/replace" in this thread, it seems to work. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent does not launch from workbench	NickyNac	FLUENT	8	April 13, 2018 09:42
Get Maxwell ansoft results in ansys workbench and find the flow velocity in Fluent, i	rrahman	FLUENT	0	April 16, 2016 21:11
Engineering data (workbench application) to FLUENT	ahvz	FLUENT	0	March 29, 2013 10:04
error in opening fluent in ansys workbench	tmeysam92	ANSYS	3	March 12, 2013 06:10
parallel fluent under pbs not working	kharnabnew	FLUENT	0	January 6, 2011 03:28