eddy current at different frecuencies
Theory of eddy current frequency
https://cipca.mforos.com/1357867/130...s-frecuencias/ Hello, I am trying to simulate a magnetic field generated from a coil with a current of 150 mA (solid) with different frequencies to detect defects in metal. I have simulated tree defects of 0.5, 1, and 2 mm of deep. In theory for higher frequencies should be well detected defect smaller, like 0.5 mm, and for lower frequencies should be easy to detect deeper defect, like 2 mm, but when I simulate it is it the opposite. I chose maxwell - solution type - eddy current. How could be? This is the coil on the top of the sample: coil on the sample This is the lateral view: laterale The field at 1 mm from the sample with a defect of 2 mm at 1 kHz: https://cipca.mforos.com/1357867/130...s-frecuencias/ The field at 1 mm from the sample with a defect of 2 mm at 20 kHz: https://cipca.mforos.com/1357867/130...s-frecuencias/ |
All times are GMT -4. The time now is 07:52. |