How to analysis an oven with fire as heater?

Alfinmp · September 12, 2020, 02:42

Hello guys i am a newbie in CFD.
I just wanna ask that how to analysis heat transfer of rotating cylinder using fire?

Link above is my geometry, so the cylinder is being heated from bottom, the solid under the cylinder i assumed as a stove, and how could i ignite a fire with that?
I hope you all can help me.
Thanks.

aero_head · November 29, 2020, 01:40

Hello Alfin,

I do not see a link, nor an attachment. Could you please attach a thumbnail?

Alfinmp · November 29, 2020, 02:35

Quote:

Originally Posted by aero_head

Hello Alfin,

I do not see a link, nor an attachment. Could you please attach a thumbnail?

I am sorry, here is my geometry.

riberto · January 23, 2021, 19:05

Hello! As I understand it, you want to regulate the heat generated by your heating device. I had a similar situation with my 80-gallon water heater. After the purchase, everything was quite simple and I was pleased with its performance and speed. However, over time, I began to hear hot water heater hissing and leaking. As it turned out, these units are very sensitive to the quality of water and, as a result of frequent use, scale is formed, which destroys the spirals and does not allow the quick operation of the water heater. I had to spend several months looking for the right parts and a lot of money for repairs.

Alfinmp · January 24, 2021, 04:59

Quote:

Originally Posted by riberto

Hello! As I understand it, you want to regulate the heat generated by your heating device. I had a similar situation with my 80-gallon water heater.

Hey there, then do you solve your problem?

September 12, 2020, 02:42	How to analysis an oven with fire as heater?	#1
Alfinmp Member Alfin Pohan Join Date: Sep 2020 Posts: 40 Rep Power: 4	Hello guys i am a newbie in CFD. I just wanna ask that how to analysis heat transfer of rotating cylinder using fire? Link above is my geometry, so the cylinder is being heated from bottom, the solid under the cylinder i assumed as a stove, and how could i ignite a fire with that? I hope you all can help me. Thanks.

January 23, 2021, 19:05		#4
riberto New Member John Keit Join Date: Jan 2021 Posts: 1 Rep Power: 0	Hello! As I understand it, you want to regulate the heat generated by your heating device. I had a similar situation with my 80-gallon water heater. After the purchase, everything was quite simple and I was pleased with its performance and speed. However, over time, I began to hear hot water heater hissing and leaking. As it turned out, these units are very sensitive to the quality of water and, as a result of frequent use, scale is formed, which destroys the spirals and does not allow the quick operation of the water heater. I had to spend several months looking for the right parts and a lot of money for repairs. Last edited by riberto; February 1, 2021 at 16:35.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PhD thesis with funding - Modelling of Fire Suppression in Heritage Buildings	AxelCable	CFD Freelancers	1	June 30, 2020 14:05
Bake Oven CFD Analysis	gavaskarkrishnan	STAR-CCM+	3	November 30, 2018 16:36
how to analysis a convection oven	omegam1	FLUENT	2	July 3, 2017 08:47
Analysis of building elements under fire	blackarrow	ANSYS	1	January 26, 2017 03:23
help needed on Design and Analysis of thermosyphon solar water heater	simran46	ANSYS	1	July 9, 2014 13:19

November 29, 2020, 01:40		#2
aero_head Senior Member Kira Join Date: Nov 2020 Location: Canada Posts: 436 Rep Power: 7	Hello Alfin, I do not see a link, nor an attachment. Could you please attach a thumbnail?